Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 147 GB, 15 000 RPM Ultra320 SCSI drive with a 3.8 ms seek time for server workloads
The HP 347708-B22 is a 147GB 3.5-inch internal hard drive spinning at 15000 RPM over an Ultra320 SCSI interface. It is built for servers that demand high transaction throughput and low latency. The bare drive ships without a tray and carries a one-year limited warranty.
Verify that your motherboard or controller supports the Ultra320 SCSI interface and an 80-pin connector before ordering. Some motherboards are not compatible with this SCSI interface. The 3.5-inch form factor requires a matching drive bay.
This drive replaces slower SCSI disks in existing Ultra320 environments where 15000 RPM and 3.8ms average seek time improve I/O response. The capacity jump from 146.8GB to 147GB is minimal, so the upgrade is worth it only when spindle speed and seek performance are the primary bottlenecks.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Model name | 347708-B22 |
| Total capacity | 147 GB |
| Recommended use | Ideal for Servers |
| Performance | |
| Rotational speed | 15,000 RPM |
| Average seek time | 3.8 ms |
| Ports & slots | |
| Interface type | Ultra320 SCSI |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 2.27 kg |
| Package size | 203 × 152 × 51 mm |
The unit is supplied as a bare drive only; the 80-pin SCA connector attaches directly to a hot-plug backplane, so no separate cables are needed, but a 3.5-inch carrier tray is required if your chassis does not already provide one.
Select this 147 GB 15000 RPM Ultra320 SCSI drive when the server workload demands the highest sustained throughput and the lowest 3.8 ms average seek time; a slower spindle would reduce both random and sequential performance.
The 320 MB/s figure is the peak bus transfer rate; real-world throughput will be lower and depends on the SCSI controller, cable length, and the number of devices sharing the bus, but the 15000 RPM spindle and 3.8 ms seek keep the drive itself from becoming the bottleneck.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?