Seagate BarraCuda ST1000DM010 1TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 1 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 750 GB 3.5-inch desktop hard drive spinning at 7200 RPM with a SATA 1.5Gb/s interface
This 3.5 inch internal hard drive delivers 750 GB of storage on a SATA 1.5Gb/s interface. It spins at 7200 RPM and fits standard 3.5 inch bays with maximum dimensions of 146.05mm length, 101.6mm width and 26.11mm height. The HP 432341-B21 is supplied new and qualified for entry server and external storage environments.
This drive suits users adding bulk capacity to a desktop or entry-level server that accepts a 3.5 inch SATA 1.5Gb/s device. It is not for systems that require a 6Gb/s or 3Gb/s SATA link, nor for 2.5 inch bays, M.2 slots or PCIe-based storage. Buyers needing higher areal density, lower power draw or hot-plug trays not included with this unit should consider other form factors.
The single specification that decides fit is the 1.5Gb/s SATA interface. If the host controller or backplane only negotiates at this first-generation rate the drive will operate at its rated throughput; if the system expects a faster link the drive will still work but cannot saturate the bus. Verify the controller specification before purchase.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Model name | 432341-B21 |
| Total capacity | 750 GB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Ports & slots | |
| Interface type | SATA 1.5Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.6 mm |
| Maximum length | 146.05 mm |
| Shipping weight | 1.59 kg |
| Package size | 297 × 231 × 150 mm |
The drive measures 101.6 mm wide, 26.11 mm high and 146.05 mm long, matching the standard 3.5" form factor used in most server and desktop bays.
Slide the drive into the hot-swap tray, secure it with the four side screws, then insert the assembly into the bay until the latch clicks; the step often missed is fully engaging the latch to lock the SATA 1.5Gb/s connector.
Monitor SMART reallocated-sector counts and replace the drive once the count rises steadily or the array controller flags a predictive failure, typically after several years of continuous operation.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?