We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with front drive bays and dual power supplies

HP

HP ProLiant DL160 Gen9 1U rack server dual Xeon E5-2603 v3 8GB 2×500GB SATA

SKU CH-3TRE-RXNXK

1U rack server with dual six-core 1.6 GHz Xeon processors, 8 GB DDR4 ECC memory, two 500 GB 7.2 K SATA drives on B140i RAID, redundant hot-swap 550 W power, Matrox G200 graphics, no OS

  • ProcessorIntel Xeon E5 v3
  • Installed RAM8 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4

Installed Memory Size 8GB

HDD 2 x 500GB

  • Dual Xeon E5-2603 v3 processors provide 12 cores for parallel workloads
  • 8GB DDR4 ECC registered memory supports error-correcting operation
  • Two 500GB 7.2K SATA drives in RAID 0, 1 or 5 via B140i
  • Redundant hot-swap 550W power supply maintains uptime during module replacement
  • 1U rack chassis with 8 SFF bays and 16 DIMM slots for expansion

HP ProLiant DL160 Gen9 1U server

This 1U rack server ships with two Intel Xeon E5-2603 v3 six-core processors running at 1.6 GHz and 8 GB of DDR4 ECC registered memory. The chassis includes eight small-form-factor drive bays, two of which are populated with 500 GB 7.2K SATA drives served by the onboard B140i software RAID controller. A single 550 W hot-swap power supply is installed and the unit is sold without an operating system.

Suited for SATA-only storage arrays

The B140i controller supports RAID 0, 1 and 5 across SATA drives only, so the server fits workloads that rely on affordable 2.5-inch SATA disks. Buyers who need hardware RAID acceleration, SAS connectivity or support for faster drive interfaces should consider a different platform. The single installed power supply also means the system lacks the redundant power path found in dual-supply configurations.

Dual Xeon E5-2603 v3 with 16 DDR4 slots

The platform provides two processor sockets populated with six-core 1.6 GHz CPUs and 16 DIMM slots that accept up to 64 GB DDR4 modules per slot at 2400 MT/s. This processor and memory combination determines the maximum compute density available in this 1U chassis.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $496.99
Cheaper than about 92% of the 17,641 comparable items (median $1,910.99).
Installed RAM 8 GB
Lower than about 95% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL160 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM8 GB
Type of memoryDDR4
Maximum RAM capacity8 GB
Memory slot count16
Storage
Installed SSDNo
Disk controllerB140i Software RAID
Drive interfaceSATA
Supported RAID levels0,1,5
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200
Ports & slots
Network ports2 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Other versions of this model

5 more in the same range

Questions about this item

How do I verify the dual Xeon E5-2603 v3 CPUs and 8GB DDR4 are recognised after first boot?

Enter the system BIOS or iLO interface; both processors should appear with six cores each at 1.6 GHz and the memory tab must show 8 GB DDR4 registered ECC across the 16 DIMM slots.

Which drives, trays and cables ship with the unit and what must I source separately?

Two 500 GB 7.2 K 2.5" SATA enterprise drives with carriers are included; the B140i controller handles SATA RAID 0, 1, 5. Extra SFF trays, SAS drives or a universal media bay are not supplied.

Should I choose the 8 GB base configuration or populate more of the 16 DDR4 slots up to 1 TB?

Start with the installed 8 GB if the workload fits; add matched DDR4 registered ECC modules in pairs per processor — 4, 8, 16, 32 or 64 GB each — to reach the 1 TB limit supported by the C610 chipset.

More in Rack & Tower Servers

Similar items