We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HP

HP ProLiant DL360 Gen9 1U 2x Xeon E5-2643v3 3.4GHz 32GB DDR4 2x 500GB SATA B140i

SKU CH-KW4A-N8YYP

Dual Xeon E5-2643v3 3.4GHz CPUs with 32GB DDR4 ECC memory and two 500GB SATA drives in a 1U rack server with redundant power

  • ProcessorIntel Xeon E5 v3
  • Installed RAM32 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4
  • Dual Xeon E5-2643v3 CPUs deliver 12 cores at 3.4GHz
  • 32GB DDR4 ECC memory across 24 DIMM slots for reliability
  • 2x 500GB 7.2K SATA drives with B140i RAID 0/1/5/10
  • Redundant 500W hot-swap power supplies protect uptime
  • 1U rack form factor fits 8 SFF bays in dense deployments

Dense 1U server with dual Xeon E5-2643v3 CPUs

The HP ProLiant DL360 Gen9 fits a pair of six-core 3.4 GHz processors and 32 GB of DDR4 ECC memory into a single rack unit. Eight small-form-factor bays hold the two supplied 500 GB 7.2K SATA drives, and dual 500 W hot-swap power supplies provide redundancy. No operating system is included.

Suits workloads that need high per-core speed

Buyers who want maximum thread count or large memory footprints should look elsewhere; the installed CPUs top out at 12 cores and 24 threads total, and the board is already populated to its 32 GB limit. Environments that require hardware RAID or SAS connectivity also need a different controller.

B140i software RAID limited to SATA devices

The onboard controller manages RAID 0, 1, 5 and 10 across the installed SATA drives but cannot address SAS media. If the deployment demands hardware acceleration or SAS support, an add-in controller must be sourced separately.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $708.99
Cheaper than about 86% of the 17,641 comparable items (median $1,910.99).
Installed RAM 32 GB
Lower than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL360 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM32 GB
Type of memoryDDR4
Maximum RAM capacity32 GB
Memory slot count24
Storage
Installed SSDNo
Disk controllerB140i Software RAID
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/10
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200
Ports & slots
Network ports4 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the B140i RAID controller is correctly managing the 2x 500GB SATA drives after setup?

The B140i Software RAID supports RAID 0, 1, 5, and 10. During POST, the controller BIOS displays the detected drives and configured array status. You can also check the array health and drive state through the Intelligent Provisioning utility or the iLO management interface once the server boots.

What comes in the box with this DL360 Gen9 and what must I purchase separately?

The server includes 2x Xeon E5-2643v3 3.4GHz CPUs, 32GB DDR4 memory, 2x 500GB 7.2K 2.5" SATA drives with trays, 2x 500W redundant power supplies, and the Matrox G200 GPU. An operating system, additional DDR4 DIMMs (up to 24 slots), extra drives for the remaining 6 bays, and rail kit are not included.

Which memory configuration should I choose if I want to expand beyond the installed 32GB DDR4?

The system has 24 DIMM slots (12 per processor) and supports 4GB, 8GB, 16GB, 32GB, and 64GB DDR4 ECC Registered modules up to 2400MT/s. Maximum capacity is 3TB total. Match modules in identical pairs per channel for optimal performance; actual speed depends on the installed Xeon E5-2643v3 processor capability.

More in Rack & Tower Servers

Similar items