HP ProLiant DL380 Gen9 2U Rack Server 2x Xeon E5-2609 v3 1.9GHz 16GB DDR4 B140i 8 SFF
- 2U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with dual Xeon E5-2620 v3 CPUs, 64 GB DDR4, two 1 TB SATA drives and B140i RAID
The HP ProLiant DL360 Gen9 is a 1U rack server designed for space-constrained data centres and virtualisation clusters. It ships with two Xeon E5-2620 v3 six-core processors running at 2.4 GHz and 64 GB of DDR4 ECC memory. Storage is handled by a B140i controller with two 1 TB SATA drives in an eight-bay SFF chassis.
This configuration suits buyers deploying standard virtualisation, web hosting or application workloads that run on SATA media and software RAID levels 0, 1, 5 or 10. Organisations requiring hardware RAID acceleration, more than two processor sockets or SSD-only drive populations should evaluate other platforms.
The installed 64 GB already reaches the maximum supported capacity of this specific build, so no further DIMM upgrades are possible without replacing the memory kit. Buyers anticipating growth beyond 64 GB must plan for a different server configuration.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL360 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 64 GB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/10 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 4 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The unit occupies 1U of rack height and includes two hot-swap 500 W redundant power supplies that plug into standard rack PDU outlets.
Yes, the B140i software RAID supports RAID 0, 1, 5 and 10 across any SATA drives installed in the eight 2.5 inch bays.
During POST the System ROM reports two CPUs with 12 cores each and shows 64 GB of registered ECC DDR4 at the supported speed.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?