HP ProLiant DL360 Gen9 4B LFF E5-2670 v3 12C 2.3GHz 8GB 2x 600GB SAS H240ar

Ready-to-Rack 1U Server

The HP ProLiant DL360 Gen9 is a 1U rackmount server built for organisations that need dense compute in a single rack unit. It ships with one Intel Xeon E5-2670 v3 twelve-core processor running at 2.3 GHz and 8 GB of DDR4 ECC memory. Two 600 GB 15 K 3.5-inch SAS drives and an H240ar controller provide immediate storage capacity. Dual 500 W hot-swap power supplies deliver redundancy from day one.

Rail-Mount Installation

The 1U chassis slides into standard four-post racks using the included rails; allow clearance for front drive-bay access and rear cable routing. Memory population follows a strict 12-DIMM-per-processor sequence, so adding capacity later requires consulting the slot map. The H240ar firmware should be updated before creating arrays to avoid early drive-detection issues. Drive trays are proprietary — replacements must match the HP 3.5-inch LFF carrier.

Twelve-Core Xeon E5-2670 v3

The installed processor delivers twelve physical cores and twenty-four threads at a base frequency of 2.3 GHz, defining the throughput ceiling for virtualisation, database or compute workloads. A second socket is available for a matching E5-2600 v3 or v4 CPU to double core count. Maximum supported memory reaches 3 TB when both sockets are populated with 64 GB DIMMs. Buyers who need higher single-thread frequency or newer instruction sets should evaluate alternative platforms.