We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server chassis with front drive bays and dual power supplies

HP

HP ProLiant DL380 Gen9 2U rack server 2× Xeon E5-2643v3 3.4GHz 64GB DDR4 2× 1TB SAS P440 4GB FBWC

SKU CH-19S7-YNX6Y

2U rack server with dual Xeon E5-2643v3 CPUs, 64GB DDR4, two 1TB SAS drives and P440 RAID controller

  • ProcessorIntel Xeon E5 v3
  • Installed RAM64 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4
  • Dual Xeon E5-2643v3 at 3.4GHz for high-frequency compute
  • 64GB DDR4 across 24 DIMM slots for large memory capacity
  • Two 1TB 7.2K SAS drives on P440 4GB FBWC RAID
  • Redundant 500W hot-swap power supplies for continuous uptime
  • 16 SFF bays in 2U rack form factor for dense storage expansion

HP ProLiant DL380 Gen9 2U server

The HP ProLiant DL380 Gen9 is a 2U rack server built for data-centre workloads that need dual-processor performance. It ships with two Xeon E5-2643v3 six-core CPUs running at 3.4GHz and 64GB of DDR4 ECC registered memory across 24 DIMM slots. The platform targets virtualisation hosts, database nodes and compute clusters where density and redundancy matter.

Installation and common issues

The chassis uses 16 SFF drive bays with hot-swap trays, so drive replacement does not require a shutdown. Redundant 500W power supplies are also hot-swappable and slide in from the rear. Memory population follows a 12-slots-per-processor rule; mixing ranks incorrectly or exceeding the processor’s supported 2400MT/s rate will cause the system to down-clock or fail POST.

Capacity and headroom

The Smart Array P440 controller with 4GB FBWC supports RAID 0, 1, 5, 6, 10, 50 and 60 across the two included 1TB 7.2K SAS drives and any additional SFF SAS disks. Installed memory sits at the 64GB configuration ceiling for this CPU pair, although the board accepts up to 3TB when populated with larger modules and compatible processors. Storage expansion stops at 24 SFF bays if the optional bay 3 kit is added.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $784.99
Cheaper than about 82% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL380 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity64 GB
Memory slot count24
Storage
Installed SSDNo
Disk controllerHP Smart Array P440/4 GB FBWC Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200eH2
Ports & slots
Network ports4 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Other versions of this model

5 more in the same range

Questions about this item

How do I verify the Smart Array P440 4GB FBWC RAID controller is functioning after installation?

During POST the controller initialises and reports its 4 GB flash-backed write cache status; the System Management Homepage then shows both 1 TB 7.2K SAS drives in a healthy logical drive with the chosen RAID level.

What ships with the server and which items must be sourced separately?

The chassis includes dual E5-2643v3 3.4 GHz CPUs, 64 GB DDR4 across 24 DIMM slots, two 1 TB 2.5″ SAS drives in 16 SFF bays, the P440/4GB FBWC controller, dual 500 W hot-swap power supplies and Matrox G200eH2 graphics; operating system, extra drives, media bay or additional 8 SFF cage are not included.

Which memory configuration should I choose if I want to expand beyond the installed 64 GB?

The board supports up to 3 TB using 4 GB, 8 GB, 16 GB, 32 GB or 64 GB DDR4 ECC Registered modules up to 2400 MT/s; populate the 12 slots per processor evenly to keep memory speed at the processor-rated maximum.

More in Rack & Tower Servers

Similar items