Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4 TB SAS 12 Gb/s enterprise hard drive spinning at 7200 RPM with a 7.4 ms average seek time in a hot-swap 3.5-inch form factor
The HPE 846996-B21 is a 4TB 3.5" SAS hard drive built for servers and storage arrays that require consistent throughput. Its 12Gb/s interface suits high-transaction workloads and enterprise applications where data integrity is critical. The 7200 RPM spindle speed balances capacity and access speed for midline deployments.
Average seek time is rated at 7.4ms, reflecting typical mechanical latency during mixed read-write operations. The drive is designed for continuous operation in multi-drive chassis where airflow is managed by the enclosure. Power draw scales with workload but remains within standard 3.5" enterprise envelopes.
Hot-swap carrier support allows removal or insertion without powering down the host system, reducing maintenance windows. The SAS connector provides dual-port redundancy for path failover in supported controllers. Supplied with 0-hour usage, the unit arrives factory-fresh for immediate deployment in compatible bays.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Part number | 846996-B21 |
| Total capacity | 4 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 7.4 ms |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
Slide the 3.5 inch drive into the HP hot-plug carrier until the SAS 12Gb/s connector seats firmly on the backplane. The step most people miss is securing the carrier latch fully — otherwise the drive can disconnect under vibration.
No scheduled maintenance is required for the sealed 4TB 7.2K mechanism. Monitor SMART attributes for reallocated sectors and keep the enclosure cooling adequate; replace the unit if seek time degrades past 7.4ms or error counts rise.
The 7200 RPM spindle caps sequential throughput, so sustained write speed hits the mechanical ceiling before the SAS 12Gb/s bus saturates. Expect performance to level off at the drive's native media rate during long transfers.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?