We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch hard drive in black carrier tray

HPE

HPE 872772-001 4TB 7200 RPM SATA 6.0Gb/s 3.5in internal hard drive

SKU CH-J2MD-ZBP0N MPN 872772-001

4 TB 3.5" SATA 6.0Gb/s 7200 RPM internal hard drive with hot-plug tray for HPE ProLiant DL360 Gen10 servers

  • Total capacity4 TB
  • Interface typeSATA 6.0Gb/s
  • Form factor3.5 in (8.89 cm)
  • Packaging typeBare Drive
  • Flash memory typeSLC
  • Rotational speed7,200 RPM
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6.0 Gb/s interface supports fast transfers
  • 5 inch form factor fits standard bays
  • Hot-pluggable carrier enables drive swaps without downtime

4 TB midline drive for ProLiant servers

This 3.5-inch HPE drive delivers 4 TB of storage on a SATA 6.0Gb/s interface with a 7200 RPM spindle. It ships with a carrier tray and features digitally signed firmware for server compatibility. The unit is designed for hot-plug installation in supported bays.

Suited for capacity-focused server arrays.

The drive fits HPE ProLiant DL360 Gen10 servers and similar platforms that accept 3.5-inch LFF hot-plug trays. It addresses bulk storage needs where sequential throughput matters more than random access speed. Buyers who need lower latency or higher random IOPS should look at solid-state alternatives.

SATA 6.0Gb/s interface with 7200 RPM spindle

The single specification that determines fit is the SATA 6.0Gb/s interface combined with a 7200 RPM rotational speed. This pairing fixes the maximum sustained transfer rate and average latency for the platform. Verify the server backplane supports SATA 6.0Gb/s and 3.5-inch hot-plug carriers before purchase.

How it compares

Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.

Price $263.99
Pricier than about 79% of the 4,938 comparable items (median $107.99).
Total capacity 4 TB
Higher than about 70% of the 2,372 comparable items (median 2 TB).
Price per TB $66.00 per TB
Typical for this category: the median of 2,365 items is $62.21 per TB.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHPE
Model name872772-001
Total capacity4 TB
Performance
Rotational speed7,200 RPM
Mean latency6Gb/s
Storage
Flash memory typeSLC
Ports & slots
Interface typeSATA 6.0Gb/s
Size & build
Form factor3.5 in (8.89 cm)
Shipping weight0.91 kg
Package size272 × 218 × 142 mm

Questions about this item

Does the 7200 RPM spindle or the SATA 6.0Gb/s interface limit sustained throughput first?

The SATA 6.0Gb/s interface caps burst transfer, while the 7200 RPM platters determine sustained sequential speed; under heavy streaming workloads the interface ceiling is reached before the mechanical limit.

What noise, heat or power impact should I expect when the drive runs continuously in a ProLiant DL360 Gen10?

At 7200 RPM the drive produces typical midline acoustic levels and heat output for a 3.5" SATA disk; the server chassis airflow and hot-plug carrier are designed to manage both during all-day operation.

Which component of the 872772-001 is most likely to need replacement after extended service?

The mechanical spindle and actuator assembly inside the sealed helium-free enclosure are the primary wear items; the digitally signed firmware and hot-plug carrier are solid-state and do not degrade with use.

More in 3.5-Inch Internal Desktop HDDs

Similar items