HPE BL460c G10 blade server 2× Xeon Bronze 3204 128 GB DDR4 2× 5 TB SATA

HPE BL460c G10 blade server

The HPE BL460c G10 is a dual-socket blade server equipped with two Xeon Bronze 3204 processors running at 1.90 GHz. It arrives with 128 GB of DDR4 memory and two 5 TB SATA drives managed by a Smart Array P204i-b SR controller. Integrated iLO Advanced remote management and a 20 Gb FlexFabric adapter handle administration and connectivity. This configuration targets environments that need dense compute and local storage within a standard blade enclosure.

Enclosure and power checks before ordering

Verify that your HPE c-Class enclosure has an available half-height bay and that the power supplies and cooling modules can support the additional load. The server requires DDR4 registered ECC DIMMs and 2.5-inch SATA drive carriers compatible with the Smart Array P204i-b SR controller. Confirm the installed firmware baseline matches your management tools and that the FlexFabric 650FLB adapter is supported by your interconnect modules. Buyers who need more than two internal drives or a different drive interface cannot use this chassis.

Bundled controller and remote management

The Smart Array P204i-b SR controller provides hardware RAID for the two installed SATA drives without consuming a mezzanine slot. Integrated iLO Advanced enables full remote console, virtual media and power control over the network, reducing the need for physical access. The 20 Gb FlexFabric adapter delivers converged networking for traffic and storage on a single connection. Systems requiring a dedicated hardware RAID cache module or additional mezzanine cards must source those separately.