AVGPC 2U 24-Bay 2x Xeon 4310 128GB DDR4 1TB NVME 2x 8TB SSD
- 128 GB
- 1 TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U rack server with dual 14-core Xeon processors at 2.4GHz, 512GB DDR4 memory, and a P440 SAS controller supporting four 3.5-inch drive bays
The HPE DL360 Gen9 4LFF server arrives new with two Intel Xeon E5-2680v4 processors running at 2.4 GHz, each delivering 14 cores and 35 MB cache. 512 GB of DDR4 ECC registered memory is installed across the DIMM slots, leaving headroom up to the 768 GB maximum. An HPE Smart Array P440 SAS controller manages up to four 3.5-inch SATA drive bays, while dual 500 W flex-slot power supplies and HPE iLO Advanced remote management are fitted as standard.
This configuration targets virtualisation hosts, database nodes and compute clusters that benefit from high core counts and large DDR4 capacity. The four-bay LFF chassis limits internal storage density, so buyers who need many drives or all-flash arrays should consider a different chassis. Workloads requiring dedicated GPU acceleration or more than two processor sockets are also outside the scope of this unit.
The single specification that decides fit is the pre-installed 512 GB DDR4 ECC registered memory, expandable to 768 GB. Confirm your application's memory footprint and DDR4 compatibility before ordering, because the platform does not support other memory generations and the installed capacity cannot be reduced.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Rack Mount |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 2.4 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 512 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 768 GB |
| Storage | |
| Installed storage | 4,00 |
| Disk controller | HPE Smart Array P440 SAS Controller |
| Drive interface | SATA |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 36 × 24 × 10 in |
| More details | |
| Management controller | HPE iLO Advanced |
The server measures 36 in deep by 24 in wide by 10 in high and weighs 40 lb, so the rack must accept that depth and weight.
Yes, the installed P440 SAS controller supports SATA drives, so your existing SATA HDDs or SSDs can be used in the four 3.5 in bays.
Check the iLO interface or POST screen; it will show 2 processors, 14 cores each at 2.4 GHz, and 512 GB DDR4 memory detected.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?