We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HPE Juniper Networking

HPE Juniper Networking EX4100-F-48P 48-port PoE+ network switch

SKU CH-78QW-07WTD MPN EX4100-F-48P

A managed Layer 3 switch with 48 PoE+ ports delivering up to 30W each and a 740W total budget, plus 4x 1G/10G SFP/SFP+ uplinks and 4x 10G stacking ports

  • Product formatDesktop
  • Management typeManaged
  • Security featuresMedia Access Control (MAC) limiting (per port and per VLAN)
  • Quality of serviceL2 QoS L3 QoS Ingress policing: 1 rate 2 color Hardware queu
  • Layer support3
  • Layer 2 functionsLayer 2 switching Maximum MAC addresses per system: 64,000 J
  • 48 PoE+ ports deliver up to 30W each with a 740W total power budget
  • Layer 3 switching supports 32,650 IPv4 routes and 16,100 multicast routes for scalable routing
  • 64,000 MAC address capacity and 4,094 VLAN IDs enable dense, segmented networks
  • 9,216-byte jumbo frames and 12 hardware queues per port optimise high-throughput traffic handling
  • Four 10GbE SFP+ uplinks plus four dedicated 10GbE stacking ports provide flexible high-speed connectivity

Switch for PoE access layer

The HPE Juniper Networking EX4100-F-48P is a managed Layer 3 desktop switch with 48 PoE+ ports and a 740W PoE power budget. It includes four 1GbE/10GbE SFP/SFP+ uplink ports and four 10GbE stacking or uplink ports. The unit supports cloud management via Mist AI and Juniper Wired Assurance.

Suited for PoE-heavy access deployments

This switch fits networks that need to power many devices such as access points, cameras or phones from a single rack unit. It is not for buyers who require higher port speeds than 1GbE on the access ports. It is also not for teams that prefer a purely on-premises management model without cloud connectivity.

PoE budget of 740W

The total PoE power budget of 740W determines how many ports can simultaneously deliver the maximum 30W per port. Exceeding this budget will limit the number of fully powered devices. Verify the aggregate draw of your connected endpoints before deployment.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $7,306.99
Pricier than about 90% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameJuniper Networks, Inc.
Product lineEX4100-F
Model nameEX4100-F-48P
Part numberEX4100-F-48P
Connectivity
Management typeManaged
Layer support3
Ports & slots
PoE-enabled ports48 x PoE
Power
Power over EthernetYes
Total PoE power740 W
Size & build
Product dimensionsWith power supply installed: 17.36 × 1.72 × 12.26 in (44.09 × 4.37 × 31.14 cm)
Product weight11.46 lb (5.2 kg)
Shipping weight4.54 kg
Package size572 × 521 × 152 mm
More details
Product formatDesktop

Questions about this item

What rack space and clearance does the 17.36 x 1.72 x 12.26 inch chassis require?

The switch occupies 1U of rack height at 1.72 inches tall, with a depth of 12.26 inches; allow additional rear clearance for cable bends and power-supply airflow.

What is the correct sequence for loading the PoE budget across the 48 ports?

Connect powered devices first, then verify the cumulative draw stays within the 740 W budget using the management interface; the common mistake is exceeding the budget before enabling port-level limits.

Which components are field-replaceable and what is the typical replacement cycle?

The internal fan tray and power supply are hot-swappable; fans typically run five years under continuous operation, while the power supply is rated for a similar service life.

More in Ethernet & PoE Switches

Similar items