Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
14 TB 3.5" internal hard drive with 7200 RPM spindle speed and SATA 6.0 Gb/s interface
The HPE P09165-B21 is a 14 TB internal hard drive built for desktop systems and entry-level servers. It uses a 3.5 inch form factor and connects through a SATA 6.0Gb/s interface. The drive spins at 7200 RPM and uses a 512e disk format for broad compatibility. It ships new in retail or OEM packaging that may vary.
This drive suits users who need high-capacity storage for archives, backups or media libraries where cost per terabyte matters most. It is not intended for workloads that require the low latency or high random IOPS of solid-state storage. Builders populating 2.5 inch bays or systems limited to SATA 3.0Gb/s should verify mechanical and electrical fit before purchase.
The 512e disk format presents 512 byte logical sectors to the operating system while using 4K physical sectors on the media. Older operating systems or RAID controllers that lack 512e support may not recognise the full 14 TB capacity. Confirm that your host bus adapter, BIOS and OS handle 512e drives before installing this model.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HPE |
| Part number | P09165-B21 |
| Total capacity | 14 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
The SATA 6.0Gb/s interface limits the drive to a maximum theoretical throughput of 600 MB/s, which is the ceiling for sequential read and write operations on this 14 TB model.
This drive needs a standard 3.5-inch internal bay and uses the typical bottom and side screw holes for secure mounting in a desktop chassis or server tray.
Connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 512e formatted disk in the operating system — skipping initialisation leaves the 14 TB volume invisible.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?