We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server front panel with drive bays and status lights

HPE

HPE ProLiant DL160 Gen10 rack server Xeon Silver 4110 32GB 2TB SATA

SKU CH-FW6M-0Y8AP

Compact 1U rack server with Xeon Silver 4110 8-core processor, 32GB DDR4 memory and 2TB SATA SSD storage

  • ProcessorIntel Xeon
  • Installed RAM32 GB
  • Installed SSD2 TB
  • Operating systemNo
  • Rack height1U
  • Supported RAID levelsHP Smart Array S100i SR Gen10
  • Compact 1U rack design fits tight remote-office spaces
  • Intel Xeon Silver 4110 8-core 2.1GHz up to 3.0GHz turbo powers workloads
  • 32GB DDR4 2666MHz memory handles multitasking smoothly
  • 2TB SATA SSD storage keeps data safe with software RAID
  • HP iLO 5 Standard enables remote server management

Compact 1U rack server for remote offices

The HPE ProLiant DL160 Gen10 is a 1U rack server built for remote office and small business roles. It runs on an Intel Xeon Silver 4110 8-core processor at 2.1GHz with 3.0GHz turbo. The system includes 32GB DDR4 memory at 2666MHz and two 1TB SATA SSDs for 2TB total storage. Management is handled through HP iLO 5 Standard with a single power supply.

Suits single-workload deployments.

This server fits organisations that need a space-saving platform for a single application or virtualisation host in a branch location. The dual 1Gb network ports and software RAID cover basic connectivity and data protection. Buyers who require redundant power supplies or hardware RAID with battery-backed cache should consider other configurations.

SATA SSD throughput limited to 6Gb/s interface

The installed solid-state drives connect through a 6Gb/s SATA link managed by the HP Smart Array S100i SR Gen10 controller. This interface sets the maximum sequential transfer rate for the storage subsystem. Workloads that demand higher sustained bandwidth will be constrained by this connection speed.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,442.99
Cheaper than about 60% of the 17,641 comparable items (median $1,910.99).
Installed RAM 32 GB
Lower than about 80% of the 15,103 comparable items (median 128 GB).
Installed SSD 2 TB
Higher than about 80% of the 144 comparable items (median 1 TB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product lineProLiant DL160 G10
CPU modelXeon Silver 4110
Processor
ProcessorIntel Xeon
Memory
Installed RAM32 GB
Storage
Installed SSD2 TB
Supported RAID levelsHP Smart Array S100i SR Gen10
Size & build
Rack height1U
Software
Operating systemNo

Questions about this item

What rack height and form factor does the 1U DL160 Gen10 server require for mounting?

The server occupies a single 1U rack space in a standard four-post cabinet and ships with fixed mounting rails for front installation.

Which steps are required to install the included memory and storage upgrades that ship separately?

Power down the server, open the chassis lid, insert the DDR4 DIMMs into the vacant memory slots, mount the two 1TB SATA SSDs into the front drive bays, then cable them to the Smart Array S100i controller.

What components are likely to need replacement during the server's service life?

The single power supply, cooling fans, the two 1TB SATA SSDs and the CMOS battery are the primary field-replaceable units that may require attention over time.

More in Rack & Tower Servers

Similar items