We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE ProLiant DL360 Gen9 4LFF rack server, silver front bezel with four drive bays

HPE

HPE ProLiant DL360 Gen9 4LFF 2x Xeon E5-2683 v4 384GB DDR4

SKU CH-X4YH-74G2P

Rack server with dual Xeon E5-2683 v4 processors, 384 GB DDR4 memory and four 3.5-inch drive bays

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.1 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual Xeon E5-2683 v4 processors deliver 16 cores each at 2.1GHz
  • 384GB DDR4 ECC registered memory supports large datasets with room to expand to 768GB
  • Four 3.5-inch drive bays with P440 SAS controller enable flexible SATA storage
  • HPE iLO Advanced remote management provides out-of-band control and monitoring
  • Dual 500W flex-slot power supplies add redundancy in a 1U chassis

HPE ProLiant DL360 Gen9 4LFF Server

The HPE ProLiant DL360 Gen9 is a 1U rack server fitted with two Xeon E5-2683 v4 processors running at 2.1GHz and 384GB of DDR4 ECC registered memory. It targets organisations that need dense compute for virtualisation or database workloads in a standard rack. The chassis provides four 3.5-inch drive bays ready for SATA or SAS media.

Installation notes and common issues

The unit ships with 500W flex-slot power supplies and an HPE Smart Array P440 SAS controller already seated. Rail kits are available on request but not included by default. BIOS and firmware are updated to the latest stable release before dispatch. Installers sometimes overlook the need to populate drives and configure RAID before the operating system install begins.

Pre-order checklist

Verify that your rack can accommodate the 36 x 24 x 10 inch form factor and 40 unit weight. Confirm the facility can supply redundant power to both 500W modules. Ensure the network infrastructure supports the installed dual 10GbE and dual 1GbE ports. Memory expansion up to 768GB requires additional DDR4 registered DIMMs matched to the existing configuration.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,638.99
Cheaper than about 56% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.1 GHz
Lower than about 70% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.1 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage16,00
Disk controllerHPE Smart Array P440 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controllerHPE iLO Advanced

Questions about this item

How do I verify the HPE iLO Advanced remote management is responding after powering on the DL360 Gen9?

Connect a network cable to the iLO port, then browse to the address shown on the POST screen or DHCP lease; the login prompt confirms the iLO Advanced firmware is active and the 2x Xeon E5-2683 v4 CPUs have passed self-test.

What components are included in the box and which storage items must be purchased separately for the 4LFF chassis?

The shipment contains the 1U rack server with 2x Xeon E5-2683 v4 processors, 384GB DDR4 ECC registered memory, P440 SAS controller, dual 500W power supplies, Intel I350/X540 2x 10GbE + 2x 1GbE network card and rail kit on request; no 3.5" SATA drives are installed so you must buy them separately.

Should I choose the 384GB DDR4 configuration or expand toward the 768GB maximum for my workload?

The system arrives with 384GB DDR4 ECC registered memory installed across the available DIMM slots; if your application needs more capacity you can add compatible DDR4 modules up to the 768GB limit supported by the dual Xeon E5-2683 v4 processors.

More in Rack & Tower Servers

Similar items