We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE ProLiant DL360 Gen9 1U rack server silver front with eight 2.5 inch drive bays

HPE

HPE ProLiant DL360 Gen9 8SFF Xeon E5-2680v4 384GB DDR4 rack server

SKU CH-ZSRM-KJCND

A 1U rack server with a 2.4 GHz 14-core Xeon E5-2680v4 and 384 GB DDR4 ECC memory, supporting up to eight 2.5-inch drives via a P440 SAS controller and dual 10 GbE plus 1 GbE networking

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.4 GHz
  • Installed CPUs1
  • Max supported CPUs2
  • 14-core Xeon E5-2680v4 at 2.4 GHz delivers strong multi-threaded performance
  • 384 GB DDR4 ECC registered memory supports large virtualisation workloads
  • Eight 2.5-inch drive bays with P440 SAS controller enable flexible storage arrays
  • Dual 500 W flex-slot power supplies provide redundancy for continuous uptime
  • HPE iLO Advanced remote management allows full out-of-band server control

8SFF 2.5-inch drive bays

The HPE ProLiant DL360 Gen9 is a 1U rack server built for dense compute workloads. It ships with a single Intel Xeon E5-2680v4 processor running at 2.4 GHz with 14 cores and 35 MB cache. The chassis supports up to eight 2.5-inch SATA or SAS drives via the onboard Smart Array P440 controller. Integrated iLO Advanced remote management simplifies administration.

Virtualisation hosts needing memory density

This configuration delivers 384 GB of DDR4 ECC registered memory, ideal for virtualisation clusters or in-memory databases that prioritise capacity over GPU acceleration. The single-socket layout leaves one processor socket free for future expansion to dual-CPU operation. Buyers who require installed storage drives or discrete graphics should look at alternative configurations.

Memory ceiling of 768 GB DDR4

The system board accepts up to 768 GB of DDR4 across its DIMM slots, so the installed 384 GB represents half the maximum capacity. This headroom allows straightforward upgrades without replacing modules. Confirm your application’s memory footprint against this limit before purchase.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,328.99
Cheaper than about 64% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.4 GHz
Higher than about 60% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.4 GHz
Installed CPUs1
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage3,84
Disk controllerHPE Smart Array P440 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controllerHPE iLO Advanced

Questions about this item

How do I install the Xeon E5-2680v4 processor and what step is often missed?

Align the processor notches with the socket keys, lower it gently, then close the retention lever fully; the step often missed is applying the correct torque sequence on the heatsink screws so pressure spreads evenly across the 14 cores.

What maintenance will the 384GB DDR4 memory need later?

The DDR4 ECC registered modules require no scheduled replacement; run the built-in memory test via iLO after any firmware update and reseat a DIMM only if the system logs a correctable-error threshold.

What limit appears first when the P440 controller runs sustained writes?

The P440 SAS controller write cache saturates before the 2.5" drive bays reach throughput limits, so enable flash-backed write cache and monitor cache-hit ratio in iLO to avoid latency spikes.

More in Rack & Tower Servers

Similar items