AVGPC 2U 24-Bay 2x Xeon 4310 128GB DDR4 1TB NVME 2x 8TB SSD
- 128 GB
- 1 TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Rack server with two 3.2 GHz Xeon processors, 384 GB DDR4 memory, P440 SAS controller, and four 3.5-inch drive bays
The HPE ProLiant DL380 Gen9 is a 4LFF rack server built for data-centre workloads. Two Xeon E5-2667 v4 processors run at 3.2GHz with eight cores each and 25MB cache. The system ships with 384GB of DDR4 ECC registered memory and a P440 PCIe SAS controller. No drives are installed, leaving the four 3.5-inch bays open for SATA or SAS media.
This configuration targets buyers who want maximum installed RAM and strong single-thread performance in a 2U form factor. The dual 500W Flex Slot supplies and iLO Advanced remote management support continuous operation. Buyers who need more than four drive bays, GPU acceleration, or 10GbE networking out of the box should look at larger chassis or add-on cards.
The chassis accepts up to four large-form-factor drives connected through the onboard P440 SAS controller. This bay count fixes the raw storage ceiling and RAID options before any expansion shelf is added. Buyers planning larger direct-attached arrays must account for this limit when sizing the deployment.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Rack Mount |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 3.2 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 384 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 3 TB |
| Storage | |
| Installed storage | 16,00 |
| Disk controller | HPE Smart Array P440 SAS Controller |
| Drive interface | SATA |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 36 × 24 × 10 in |
| More details | |
| Management controller | HPE iLO Advanced |
The 4LFF chassis supports up to four 3.5-inch drive bays; matching LFF caddies are needed to install SATA or SAS drives with the P440 controller.
Yes, the server uses DDR4 ECC registered memory; any compatible DDR4 ECC RDIMMs can be added up to the 3 TB maximum capacity.
During POST the P440 option ROM appears and the iLO network port shows a link light; both can then be accessed via F10 and the iLO web interface.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?