We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server front with eight 2.5 inch drive bays

HPE

HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2620 v4 384GB DDR4

SKU CH-8PJN-6Y4MS

Rack server with two Xeon E5-2620 v4 CPUs at 2.1 GHz, 384 GB DDR4 memory, P440 SAS controller and eight 2.5-inch drive bays

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.1 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual Xeon E5-2620 v4 processors provide 2.1 GHz performance
  • 384 GB DDR4 ECC memory supports large workloads
  • Eight 2.5-inch drive bays allow flexible storage
  • HPE Smart Array P440 SAS controller manages RAID arrays
  • HPE iLO Advanced enables remote server management

HPE ProLiant DL380 Gen9 8SFF server

This rack-mount server system ships with two Intel Xeon E5-2620 v4 processors running at 2.1GHz and 384GB of DDR4 ECC registered memory. The eight 2.5-inch drive bays accept SATA or SAS media through the integrated HPE Smart Array P440 controller. Remote management is handled by HPE iLO Advanced for out-of-band control. The dual 500W Flex Slot power supplies provide redundancy for continuous operation.

Sustained load behaviour

Under continuous workloads the dual 8-core processors maintain their 2.1GHz base frequency while the P440 controller manages RAID arrays without throttling. The 384GB memory capacity supports large in-memory databases and virtualisation hosts that run for weeks without reboot. Redundant power supplies and hot-plug drive bays allow component replacement while the server stays online. Firmware is updated to the latest stable version before shipment.

Pre-order checklist

Verify that your rack provides 36 inches of depth and 24 inches of width for the 2U chassis. Confirm the facility can deliver 10A per power supply on separate circuits for full redundancy. Ensure you have SATA or SAS drives compatible with the P440 controller because no drives are installed. Check that your network infrastructure supports the installed Intel I350 and X540 10GbE and 1GbE ports. Rail kit is available separately if required.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,470.99
Cheaper than about 60% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.1 GHz
Lower than about 70% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.1 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity3 TB
Storage
Installed storage4,00
Disk controllerHPE Smart Array P440 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controllerHPE iLO Advanced

Questions about this item

How much heat and power should I expect from the two 2.1 GHz Xeon E5-2620 v4 CPUs and 384 GB DDR4 running continuously?

Dual 2.1 GHz Xeon E5-2620 v4 processors and 384 GB DDR4 draw significant power under sustained load; the chassis uses redundant 500 W Flex Slot supplies and active cooling to manage heat in the 36 x 24 x 10 in rack form factor.

Which drives and caddies do I need to add so the P440 SAS controller can present storage to the OS?

The 8SFF chassis accepts 2.5 inch SATA or SAS drives; the P440 SAS controller manages RAID across installed drives, but no drives or drive caddies are included in this configuration.

Will my existing PCIe 3.0 SAS HBAs and 1 GbE switches work with the onboard X540 10 GbE ports and P440 controller?

The system provides two 10 GbE X540 ports and two 1 GbE I350 ports alongside the P440 SAS controller; all use standard PCIe 3.0 and Ethernet links compatible with existing SAS HBAs and 1 GbE switches.

More in Rack & Tower Servers

Similar items