HPE ProLiant DL380 Gen9 8SFF 2x Xeon E5-2640 v4 512GB DDR4 rack server

Ready-to-deploy rack server

The HPE ProLiant DL380 Gen9 ships with two Xeon E5-2640 v4 processors, each running at 2.4 GHz with ten cores and 25 MB cache. 512 GB of DDR4 ECC registered memory is installed across the 24 DIMM slots, leaving room to grow toward the 3 TB maximum. The 8SFF chassis accepts up to eight 2.5-inch SAS drives behind a Smart Array P440 controller, and integrated graphics handle console output without a discrete GPU.

Verify rack space and power before ordering

The unit measures 36 x 24 x 10 inches and weighs 40 units, so confirm your cabinet depth and weight rating. Two 500 W Flex Slot power supplies are fitted; ensure your PDU or UPS provides matching IEC connectors and sufficient circuit capacity. Network connectivity uses an Intel I350/X540 card delivering two 10 GbE and two 1 GbE ports — check that your switch ports and cabling support the required speeds. iLO Advanced remote management is licensed and ready once an Ethernet link is provided.

Tool-less serviceability and flexible expansion

The 8SFF drive cage uses tool-less carriers for quick SAS drive swaps, and the P440 controller supports online RAID level migration. Full-length PCIe slots are accessible after removing the top cover with a single latch, allowing additional NICs, HBAs or accelerators without cable routing hassles. Redundant fans and power supplies are hot-swap, so maintenance windows stay short. Rail kits are available on request to match your rack’s mounting standard.