We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two sets of brass garden hose quick-connect fittings with male and female ends

HQMPC HQ-K03A 3/4" GHT Brass Quick-Connect Fitting 2 Sets

SKU CH-MH6J-A4KA2 MPN HQ-K03A

Two sets of solid brass 3/4" GHT quick-connect fittings rated to 200 PSI for leak-free garden hose connections

  • Tube size2 Sets
  • Thread size0.75 in (1.91 cm)
  • End connectionsGHT
  • Certifications and standards2 Sets
  • Construction materialBrass
  • Pipe size2 Sets
  • Standard 3/4" GHT fits common garden hoses and nozzles
  • Solid brass construction resists corrosion and prevents leaks
  • Rated to 200 PSI for reliable high-pressure water flow
  • One-handed quick connect and disconnect in seconds
  • Includes two female couplers, two male nipples and four washers

Brass Quick-Connect Set for Standard Garden Hoses

This two-set kit provides two female couplers and two male nipples with 3/4" GHT threads. Solid brass construction resists corrosion and handles up to 200 PSI for reliable outdoor water connections. The push-to-connect design allows one-handed operation when attaching nozzles, sprinklers or hose ends. Four washers are included to help seal each joint.

Upgrade from Plastic or Aluminum Quick Connects

The brass bodies eliminate the cracking and thread stripping common with lighter alloys under repeated pressure cycles. Switching is worthwhile when existing fittings leak at the coupler or when seasonal temperature swings cause plastic to become brittle. The heavier wall thickness maintains a tight seal through frequent connect and disconnect cycles.

Fits Standard 3/4" GHT Spigots, Hoses and Nozzles

Male nipples thread directly onto faucet bibs or hose ends using the .75 inch GHT standard. Female couplers accept the nipples for tool-free changes between spray guns, soaker hoses or watering wands. PTFE tape on the male threads is recommended to prevent seepage at the threaded connection. The set frees up time by removing the need to twist hoses on and off by hand.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $30.99
Pricier than about 70% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameHQMPC
Model nameHQ-K03A
Part number1
Processor
Thread size0.75 in (1.91 cm)
Size & build
Tube size2 Sets
Construction materialBrass
Pipe size2 Sets
Surface finishBrass
Compatibility
Fit and compatibility0.75 in (1.91 cm)
Environment & compliance
Certifications and standards2 Sets
More details
End connectionsGHT

Questions about this item

What thread size do the brass quick-connect fittings use?

The fittings use a standard .75 inch GHT thread size for both male and female ends.

How do I install the male nipple to avoid leaks?

Wrap PTFE tape on the sharp male threads, tighten with a tool while wearing gloves, then press the female coupler onto the nipple until it clicks.

When should I replace the included washers?

Replace the washers if you see dripping at the connection or after seasonal storage when rubber may have hardened.

More in Hose Fittings, Adapters & Clamps

Similar items