We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow IEC pin-and-sleeve inlet, flanged housing, 20A 125V

Hubbell Incorporated

Hubbell HBL320B4W IEC pin and sleeve inlet 20A 125V yellow

SKU CH-B0B2-W64Q4

Watertight IEC pin-and-sleeve inlet rated 20 A at 125 V with IP67 protection and screw terminals for 14–10 AWG wire

  • Color familyYellow
  • Color and finishYellow
  • Product typeLight Switch
  • IP67 watertight seal resists moisture and dust
  • 20 A / 125 V AC rating powers industrial equipment
  • IEC grounded 2-pole 3-wire configuration ensures safe connections
  • Screw terminals accept 14–10 AWG wire for secure termination
  • Yellow housing and 1.85 in face diameter aid quick identification

Industrial power inlet for wet locations

The Hubbell HBL320B4W is a watertight IEC pin-and-sleeve inlet rated 20 A at 125 V AC. Its IP67 housing and yellow finish suit industrial equipment that must stay powered in wash-down or outdoor environments. Single-phase, three-wire grounding meets IEC grounding style requirements.

Screw terminals accept 14 to 10 AWG conductors

The flanged inlet uses screw-terminal connections for solid or stranded wire from 14 AWG up to 10 AWG. A 1 hp motor rating allows direct connection of small industrial motors. The shrouded, grounded pins maintain polarity and safety when mated with a matching IEC connector.

Flange mount needs 2.72 in cut-out and four screws

Face diameter is 1.85 in and flange diameter is 2.72 in, so the panel cut-out must match that bolt circle. Moisture-resistant seals only work when the mating connector is fully seated and locked. Mis-wiring the three poles or exceeding the 20 A rating will trip upstream protection.

How it compares

Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.

Price $130.99
Pricier than about 81% of the 791 comparable items (median $39.99).

Specifications

Product
Brand nameHUBBELL
Color and finishYellow
Color familyYellow
Product typeLight Switch

Questions about this item

How often should the screw terminals on this 20 A inlet be checked and retightened?

Inspect the screw terminals annually or after any vibration event; retighten to the manufacturer torque value to maintain a secure 10–14 AWG connection.

What is the continuous current limit before the 125 V inlet reaches its thermal rating?

The inlet is rated for 20 A continuous at 125 V AC; sustained loads above that will exceed the device thermal limit.

Does the IP67 housing add noticeable heat rise when the inlet runs at 20 A all day?

The IP67 watertight seal does not change the rated temperature rise; at 20 A the inlet stays within its designed thermal envelope.

More in Electrical Switches & Dimmers

Similar items