Hubbell Incorporated 02203021 Cable Support Grip 2.00 to 2.49 in

Cable support grip for 2.00 to 2.49 in cables

The Hubbell 02203021 cable support grip handles single cables with diameters between 2.00 and 2.49 inches. It uses an eye-style design with a rod-closing grip to distribute tension along the mesh. The tin-coated bronze construction resists corrosion in demanding environments. Installers working with heavy vertical or sloped cable runs will find this grip rated for the load.

3260 lb breaking strength and fixed mesh length

The grip provides a breaking strength of 3260 lb, which sets the absolute limit for static pulling or support force. Mesh length is fixed at 19 1/2 inches and eye length at 16 inches, so the overall reach cannot be adjusted on site. CSA certification confirms compliance with the applicable safety standard. The transparent colour allows visual inspection of the cable jacket inside the mesh.

Replaces smaller-diameter grips when cable size

This model steps up from grips rated for cables below 2.00 inches, closing the range up to 2.49 inches. The jump is worth it when the installed cable falls outside the capacity of the next size down and the 3260 lb rating meets the structural requirement. It is not for cables thinner than 2.00 inches or thicker than 2.49 inches, nor for applications needing a different mesh or eye length.