Hubbell Incorporated 074-01-002 Liquid-Tight Strain Relief Cord Grip 0.31 to 0.38 in video accessory

Liquid-tight cord grip 0.31-0.38 in

The Hubbell 074-01-002 is a straight liquid-tight strain relief cord grip designed for a single cable with an outside diameter between 0.31 and 0.38 inches. It connects to a 3/8 inch MNPT threaded entry and uses an aluminum body with a stainless steel mesh gland to secure the cord and seal the enclosure. The connector adds 7/8 inch from the box face to the end of the fitting.

Indoor or outdoor cable entries needing a sealed

Installers pulling one cable through a knockout in a junction box, panel or machine housing will find the mesh grip distributes tension evenly without damaging the jacket. The fitting is not insulated and carries no colour code, so it suits general-purpose power or signal cables where a liquid-tight seal is required. Buyers who need to terminate multiple cables in one fitting or who require an insulated throat should look at other designs.

0.31 to 0.38 inch cable diameter range

The sole dimension that decides fit is the cord diameter window of 0.31 to 0.38 inches; the cable jacket must fall inside this range for the mesh to hold and the gland to seal. The 3/8 inch MNPT thread and 7/8 inch installed length are fixed by the part design, so the enclosure knockout and available depth must match those values. No other size option exists for this model.