We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic rectangular LED driver with IP66 rating

Hubbell Incorporated

Hubbell Incorporated 40W 450mA 45-89V 0-10V IP66 Ballast

SKU CH-H5QV-XZ2JR

40 W constant-current LED driver with 450 mA output, 45–89 V range, 0–10 V dimming and IP66 housing

  • Product typeElectrical ballast
  • Constant 450 mA output for stable LED performance
  • 40 W maximum power covers a wide load range
  • 0-10 V dimming enables smooth brightness control
  • IP66 rated housing withstands dust and water jets
  • 100-277 V AC input works on global mains voltages

40W Constant-Current LED Driver

This 40W constant-current LED driver supplies a fixed 450 mA output across a 45-89 Vdc range. It accepts a universal 100-277 Vac nominal input (90-305 V min/max) with a power factor above 0.9 and a maximum input current of 0.4 A. The isolated design uses a Black Magic Thermal Advantage plastic housing rated IP66.

Installers needing 0-10V dimming and IP66 protection

Suited for indoor or outdoor LED luminaires that require 0-10V dimming control and a sealed, weatherproof enclosure. Not intended for fixtures that need a different output current, a voltage range outside 45-89 Vdc, or a non-dimmable driver.

Fits standard wiring boxes and damp locations

The driver connects to mains voltages from 100-277 Vac and delivers up to 40W to a compatible LED array. Its IP66-rated housing allows mounting in damp or wet environments without additional weatherproofing. The 0-10V interface works with common dimming controls, freeing the installer from proprietary dimming systems.

How it compares

Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 77% of the 265 comparable items (median $61.99).

Specifications

Product
Brand nameHubbell
Product typeElectrical ballast

Questions about this item

What LED array voltage range must my fixture provide for this 45-89 Vdc driver?

The driver delivers a constant 450 mA across an output window of 45 to 89 Vdc, so the connected LED load must fall within that range.

Will the 0-10 V dimming input work with my existing analogue dimmer that sinks 10 V?

Yes, the unit accepts a standard 0-10 V control signal and dims smoothly from full output down to minimum.

How can I verify the IP66 seal is intact after mounting the housing?

Inspect the Black Magic Thermal Advantage plastic housing for cracks, confirm all cable glands are tight, and check that no moisture enters during a brief spray test.

More in Lamp Ballasts & Drivers

Similar items