Hubbell Incorporated DS320R 20A 120/277V AC 3-Way Rocker Switch Red
A 20 A, 120/277 V AC rocker switch with 3-way wiring for lighting control
- 20 A rocker switch controls 120/277 V AC loads reliably
- 3-way wiring enables control from two separate locations
- Back and side wiring accepts 14 to 10 AWG conductors
- Impact-resistant construction withstands tough job-site conditions
- UL Listed for code-compliant residential and commercial installations
Hubbell 20A 3-Way Rocker Switch
This 20-ampere rocker switch handles 120/277V AC circuits in residential and light-commercial wiring. It provides maintained three-way control from two locations and accepts 14 to 10 AWG conductors via screw terminals. The impact-resistant body carries a UL Listing for code-compliant installations.
Back and side wiring with 3.3 inch mount centres
Back and side wiring options give flexibility when pulling cable into standard boxes. The 3.3 inch centre-to-centre mounting holes align with common strap dimensions, freeing space for deeper devices or insulation. A single-pole layout keeps the opening uncluttered for multi-gang plates.
No pilot light or illumination for low standby draw
The switch omits pilot lights and night-light functions, so quiescent power draw is negligible. Mechanical rocker action produces only a faint click, keeping audible noise minimal in quiet rooms. Screw-terminal connections maintain stable contact resistance under continuous 20-ampere loading.
How it compares
Measured against everything we stock in Push-Button & Disconnect Switches, at today’s prices. Recalculated every night.
- Price $21.99
- Typical for this category: the median of 194 items is $19.49.
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
Questions about this item
How many amps can the DS320R carry continuously before the 20 A rating becomes the limiting factor?
The switch is rated for 20 A at 120/277 V AC, so that current level is the design limit for sustained operation.
Does the rocker switch generate noticeable heat or noise when left on all day?
As a passive mechanical switch with screw terminals and no pilot light, it produces no audible noise and only minimal heat at rated load.
What wire gauges and tools must I have on hand to install this switch?
You need 14 to 10 AWG solid or stranded copper wire, a screwdriver for the screw terminals, and a standard wall box with 3.3 in mounting centres.
More in Push-Button & Disconnect Switches
Similar items
OSKOS RC-021 Wireless Remote Disconnect 15A 125V 100ft Range
- Outlet, Remote
- Plug-In





