Hubbell Incorporated HBL1283 3-Way Wall Switch Brown 20A 120/277V
A 20 A three-way wall switch rated for 120/277 V AC with side-wired screw terminals for 14 to 10 AWG conductors
- Color familyBrown
- Color and finishBrown
- Product typeLight Switch
- 3-way switching controls lights from two locations
- 20 A rating handles heavy-duty circuits at 120/277 V AC
- Side wiring with screw terminals accepts 14 to 10 AWG conductors
- Impact-resistant construction meets UL listing for safety
- Strip gauge and large brass binding-head screws speed accurate installation
Hubbell HBL1283 3-Way Switch
The Hubbell HBL1283 is a brown 3-way wall switch rated for 20 amps at 120/277 volts AC. It uses a maintained push-button action and screw terminals for side wiring. The device is UL listed and built with impact-resistant construction for commercial or residential lighting control.
Wiring and Circuit Checks
Verify the circuit supplies 120 or 277 volts AC and is protected by a 20-amp breaker. Confirm the box accepts side-wired devices and that conductors fall between 14 AWG and 10 AWG. The switch requires a 3-way wiring layout with a matching traveller pair and a common feed.
Sustained Load Behaviour
The switch carries its full 20-amp rating continuously without derating when installed per code. Large brass binding-head screws with deep slots maintain clamping force over repeated thermal cycles. A moulded strip gauge helps keep insulation stripping consistent for long-term connection integrity.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $34.99
- Cheaper than about 56% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Hubbell Wiring Device-Kellems |
| Color and finish | Brown |
| Color family | Brown |
| Product type | Light Switch |
Questions about this item
Does the HBL1283 switch include mounting screws and a cover plate or must they be purchased separately?
The switch is supplied as a single unit with side screw terminals for 14 to 10 AWG wire; mounting screws and a wall plate are not included and must be sourced separately.
Should I choose the 120 V or 277 V version of the HBL1283 for my circuit?
This single model is rated for both 120 V and 277 V AC circuits, so no separate version selection is required.
What does the 20 A rating mean when the switch controls a motor load?
The switch carries a 1 hp motor rating, allowing it to handle motor loads up to that horsepower at the rated voltage.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL8300RMRI 20A 125V Duplex MRI Receptacle Red
- Red
- Wiring Devices
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Schneider Electric 9001SKR2U 30 mm push button operator
- Multi
- Light Switch
Schneider Electric 9001KR3G 30 mm green push button operator
- Green
- Light Switch





