We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange IEC pin-and-sleeve plug with rugged nylon housing

Hubbell Incorporated

Hubbell Incorporated HBL420P12W IEC Pin and Sleeve Plug

SKU CH-A5C2-9HMG0

IEC pin and sleeve plug rated 20 A at 125/250 V with IP67 watertight housing and screw terminals

  • Color familyOrange
  • Color and finishOrange
  • Product typeLight Switch
  • IP67 watertight sealing protects against dust and immersion
  • 20 A at 125/250 V AC powers demanding industrial loads
  • Zytel 801 nylon housing resists impact and chemicals
  • Screw terminals accept #14–#10 AWG conductors for secure wiring
  • CSA, UL E146032 and IEC 60309-1 certifications confirm safety compliance

Industrial IEC Pin and Sleeve Plug

The Hubbell HBL420P12W is a 3-pole, 4-wire IEC pin and sleeve plug rated for 20 amps at 125/250V AC. It is built for industrial and commercial environments that require a watertight, grounded connection. The rugged housing uses Zytel 801 nylon and accepts cable diameters from .33 in to .83 in with wire sizes from #14 AWG to #10 AWG. Screw terminals provide secure conductor attachment.

Sustained load performance

The plug operates continuously between -40°C and +75°C maximum temperature. Its gasketed sealing ring maintains an IP67 rating and NEMA 4X enclosure rating during extended use, protecting internal contacts from water and dust ingress. Shrouded pins and the non-metallic housing resist impact and corrosion in harsh conditions. The device carries a maximum circuit horsepower rating of 2 hp for motor loads.

IEC 60309 interface limits

Compliance with IEC 60309-1 defines the pin geometry and keying for 3P4W 20A 250V applications, preventing mismating with other voltages or pole counts. The standard governs the interchangeability of plugs and receptacles across manufacturers. Installers must match the receptacle rating and wiring configuration exactly. The plug is CSA Certified C22.2 No.182.1 and UL listed E146032 for North American safety requirements.

How it compares

Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.

Price $177.99
Pricier than about 84% of the 791 comparable items (median $39.99).

Specifications

Product
Brand nameHUBBELL WIRING DEVICE-KELLEMS
Color and finishOrange
Color familyOrange
Product typeLight Switch

Questions about this item

Does the 20 A, 125/250 V rating mean the plug runs hot or draws extra power when used continuously?

The plug is a passive connector rated for 20 A at 125/250 V AC; it does not consume power or generate heat on its own, and its Zytel 801 nylon housing is rated for continuous operation up to 75 °C.

What cable and wire sizes must I already have to terminate this IEC 309 3-pole 4-wire plug?

The plug accepts cable diameters from 0.33 in to 0.83 in and wire sizes from 14 AWG to 10 AWG, terminated with the built-in screw terminals.

Will this IP67-rated plug mate with the older IEC 60309 receptacles already installed in my facility?

Yes, it complies with IEC 60309-1 and uses the standard 3-pole 4-wire grounding style, so it fits existing IEC 60309 receptacles of the same rating.

More in Electrical Switches & Dimmers

Similar items