Hubbell Incorporated HBL430R5W 30A 600V IEC Pin and Sleeve Receptacle
IEC pin-and-sleeve receptacle rated 30 A, 600 V AC with IP67 watertight protection and spring-loaded cap for industrial three-phase power connections
- Color familyBlack
- Color and finishBlack
- Product typeLight Switch
- IP67 watertight protection for harsh environments
- 30 A, 600 V AC rating handles heavy industrial loads
- Spring-loaded cap seals automatically after disconnect
- Thermoplastic housing resists impact and chemicals
- Accepts 12–8 AWG wire for flexible installation
Industrial IEC Receptacle
This Hubbell HBL430R5W is a watertight IEC pin-and-sleeve receptacle rated for 30 A and 600 V AC three-phase power. Its IP67 and NEMA 4X ratings plus a spring-loaded cap suit outdoor or wash-down environments where moisture and debris are present.
Installers needing 30 A three-phase connections
Electricians wiring motor loads up to 10 hp within the 12 AWG to 8 AWG wire range will find the straight flanged body and shrouded contacts convenient. Projects requiring single-phase service, a different amperage, or a non-IEC pin layout cannot use this device.
30 A 600 V three-phase rating
The receptacle is built for exactly 30 amperes at 600 volts AC across three phases with four wires. Verify that the circuit breaker, conductor size and load match these values before installation.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $197.99
- Pricier than about 86% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
| Color and finish | Black |
| Color family | Black |
| Product type | Light Switch |
Questions about this item
What wire sizes fit the 30 A 600 V receptacle terminals?
The terminals accept copper conductors from 12 AWG up to 8 AWG; strip to the length marked on the device and torque to the value printed on the label.
Which mounting pattern matches the 3.6 in face diameter?
The single-gang flanged body uses a standard 3.6 in bolt circle; align the four mounting holes with the panel cut-out and secure with the supplied hardware.
When should the spring-loaded cap and IP67 seals be inspected or replaced?
Check the cap hinge, gasket and locking ring at least once a year or after any high-pressure wash-down; replace the cap assembly if the spring no longer seats the cover flush or the seal shows cracks.
More in Electrical Switches & Dimmers
Similar items
SIEMENS Safety Disconnect Switch HF361N 30A 3PST NEMA 1
- Light Switch
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Madison M4190-HP SPST Tank Liquid Level Switch 240VAC 900 psi
- Light Switch
Hubbell HBL520R7W IEC Pin and Sleeve Receptacle 20A 480V Red
- Red
- Red





