Hubbell Incorporated HBL460C7W Watertight Pin & Sleeve Connector 60A 480V
Watertight industrial connector rated 60 A 480 V AC with IP68/IP69K protection and NEMA 4X enclosure
- Color familyRed
- Color and finishRed
- Product typeLight Switch
- Watertight protection for harsh environments with IP68/IP69K rating
- Handles heavy-duty power at 60 amps and 480V AC
- Rugged Zytel 801 nylon housing resists impact and moisture
- Accepts 8 AWG to 2 AWG wire with cable diameters .5 to 1.45 in
- Operates reliably from -40°C to +75°C temperature range
Industrial Power Connector
The HBL460C7W is a watertight pin-and-sleeve connector built for 60-amp, 480-volt AC three-phase service. Its Zytel 801 nylon housing and self-closing gasketed cover suit plant floors, outdoor equipment and wash-down zones where moisture and impact are routine.
Cable Range and Limits
Screw terminals accept 8 AWG to 2 AWG conductors while the cable gland seals diameters from .5 to 1.45 inches. The 60-amp rating defines the thermal ceiling; loads beyond that will exceed the connector’s listed capacity.
Sealed Enclosure Performance
IP68 and IP69K ratings confirm protection against prolonged immersion and high-pressure spray. The assembly operates from -40°C to +75°C without derating, and the non-metallic body eliminates corrosion paths in chemically aggressive areas.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $444.99
- Pricier than about 92% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
| Color and finish | Red |
| Color family | Red |
| Product type | Light Switch |
Questions about this item
Will the 60A 480V rating match my existing three-phase panel?
Yes, the connector is rated for 60 amps at 480V AC and designed for three-phase industrial power systems.
How can I confirm the IP68/IP69K seal is intact after wiring?
The self-closing gasketed cover clicks shut; inspect the gasket for debris and verify the cover sits flush with the housing.
Does the box include cable glands for the 0.5–1.45 in diameter range?
The connector accepts 8 AWG to 2 AWG wire and cable diameters from 0.5 in to 1.45 in; glands are not included and must be sourced separately.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL560B9W IEC Pin and Sleeve Inlet 60A 120/208V
- Blue
- Blue
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Hubbell Incorporated HBL560C7W Watertight Pin & Sleeve Connector 60A
- Red
- Red
Killark VP10477 Pin & Sleeve Plug 100A 4P 4W 600VAC 250VDC Gray
- Gray
- Wiring Devices





