Hubbell Incorporated HBL5100RS1W 100A 600V pin and sleeve receptacle
A watertight pin-and-sleeve receptacle rated 100 A at 600 V AC with a spring-loaded cap and impact-resistant thermoplastic housing
- Color familyGray
- Color and finishGray
- Product typeLight Switch
- 100 A rating handles heavy industrial loads
- Watertight construction resists moisture and impact
- Spring-loaded cap seals out contaminants
- 5-wire, 4-pole design supports three-phase power
- 600 V AC rating suits high-voltage applications
Industrial Power Receptacle
The Hubbell HBL5100RS1W is a 100A 600V AC pin and sleeve receptacle built for industrial environments. It provides a grounded, four-pole, five-wire connection with a watertight, impact-resistant thermoplastic housing and a spring-loaded cap for ingress protection.
Three-Phase Equipment Installers
This device suits electricians wiring three-phase machinery or distribution panels that require a 100A flanged inlet with Style 1 grounding. It is not for installers needing a NEMA-rated enclosure, a different pole count, or a voltage rating outside the specified 600V AC and 250V DC range.
Flanged Panel Mounting
The receptacle mounts via its integral flange and accepts conductors from 8 AWG to 2 AWG. The shrouded pins and spring-loaded cap simplify alignment and sealing, though the 4.71 in face diameter demands adequate panel space and the maximum wire size may limit use with larger feeder cables.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $414.99
- Pricier than about 91% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
| Color and finish | Gray |
| Color family | Gray |
| Product type | Light Switch |
Questions about this item
What cable gauge range must I have on hand to wire the 100 A receptacle terminals?
The terminals accept conductors from 8 AWG up to 2 AWG, so your supply cable must fall inside that range.
Will the 4-pole, 5-wire flange mate with my existing 3-phase, 600 V AC pin-and-sleeve plugs?
Yes — the receptacle is built for three-phase, 600 V AC service with four poles and five wires, matching standard industrial pin-and-sleeve plugs of that rating.
How can I confirm the spring-loaded cap is sealing properly after installation?
Close the cap and verify it snaps shut with spring tension; the watertight, impact-resistant housing should show no gaps around the flange when the cap is engaged.
More in Electrical Switches & Dimmers
Similar items
Hubbell HBL4100R5W 100A 600V IEC receptacle
- Black
- Black
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Killark VPR3465 Pin & Sleeve Connector 30A 4P 3W 600VAC/250VDC
- Gray
- Gray
Hubbell HBL4100RS1W 100A 600V Pin and Sleeve Receptacle
- Gray
- Gray





