Hubbell Incorporated LED25W-36-C0700-D 25W ballast
Constant-current LED driver delivering 25 W output for dry and damp locations
- 25 W total power for efficient LED operation
- 100–277 V AC input suits diverse supplies
- UL dry and damp location rating ensures safety
- UL8750 and Class 2 compliance meets standards
- Black Magic thermal advantage plastic housing aids cooling
25W Constant-Current LED Driver
The Hubbell LED25W-36-C0700-D is a constant-current LED driver rated for 25 watts total power. It supplies a 700 mA output current for LED arrays that require regulated current. The unit accepts a nominal input voltage range of 100 to 277 Vac. It is UL listed for dry and damp locations and meets UL8750 and Class 2 compliance.
25W Output with 36V Maximum
The driver delivers up to 25 watts across a compliance range topping out at 36 volts. It comfortably powers LED modules that fall within this voltage and current envelope. Headroom runs out when the connected load exceeds 36 volts or demands more than 25 watts. The high power factor design helps maintain efficient operation across the 100 to 277 Vac input range.
Plastic Housing for Thermal Management
The Black Magic Thermal Advantage plastic housing dissipates heat without a metal enclosure. This allows the driver to fit into tighter recesses where a bulky metal case would not suit. The isolated output simplifies wiring by removing the need for additional isolation barriers. UL Sign Components Manual listing supports use in signage builds.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 67% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
Questions about this item
Will this 25 W driver power the same LED modules my old magnetic ballast ran?
It delivers a constant 700 mA current at up to 36 V, so it only suits modules rated for that current and voltage range.
How can I verify the driver is operating correctly once wired?
Measure the output with a multimeter; you should read a steady 700 mA and a voltage between the module's forward voltage and 36 V.
Does the package include mounting hardware or wire leads, or must I source them separately?
The unit is supplied as the driver only; mounting screws, wire nuts and conduit fittings are not included.
More in Lamp Ballasts & Drivers
