We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black toggle switch with clear lighted green-red stem and silver threaded body

Hubbell Incorporated

Hubbell Incorporated M11LRGSP Lighted Toggle Switch

SKU CH-JGFA-9A3A9

A marine-grade SPST toggle switch with a lighted green/red stem for 12 V DC circuits up to 15 A

  • Color familyBlack
  • Product typeIndustrial Electrical Controls & Automation
  • Clear lighted stem shows status at a glance
  • SPST on/off function simplifies circuit control
  • 15 A at 12 V DC rating handles marine loads
  • 50 in mounting hole fits standard panels
  • Operates from -10 to 105 degrees F in harsh environments

Marine Toggle Switch

The Hubbell Wiring Device-Kellems M11LRGSP is a lighted toggle switch rated for 15 A at 12 V DC with a single-pole single-throw on-off action. A green and red illuminated stem provides immediate status indication in low-light conditions. The switch mounts in a .50 inch diameter hole and carries a .47 inch-32 UNC-2A threaded stem.

Electrical panels needing clear on-off feedback

Installers who want a visible confirmation that a circuit is live will benefit from the dual-colour lighted actuator. The SPST contact form and four solder lug or quick-connect terminals suit simple two-wire loads but cannot support multi-position or changeover wiring schemes.

15 A at 12 V DC rating

This current and voltage limit is the primary factor that determines whether the switch can handle the intended marine or automotive accessory load without overheating. Exceeding the rating risks contact failure and loss of illumination.

How it compares

Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.

Price $26.99
Cheaper than about 68% of the 791 comparable items (median $39.99).

Specifications

Product
Brand nameHUBBELL WIRING DEVICE-KELLEMS
Product typeIndustrial Electrical Controls & Automation
Color familyBlack

Questions about this item

How is the .50 in mounting hole used during installation, and what wiring step is often missed?

Drill a .50 in hole, secure the 0.47 in-32 UNC-2A threaded stem with the supplied hardware, then attach wires to the four 1/4 in solder lug/quick-connect tabs; the step often missed is confirming each lug is fully crimped or soldered before powering the circuit.

What maintenance or replacement will the lighted stem need over time?

The green/red lighted stem is integral to the switch; when the internal lamp fails the entire unit must be replaced — no separate bulb or LED module is serviceable.

At what load does the 15 A @ 12 V DC rating become the limiting factor during sustained use?

The 15 A @ 12 V DC rating is the hard limit; continuous loads above 15 amps or operation beyond the 105 °F maximum ambient temperature will cause the contacts to degrade first.

More in Electrical Switches & Dimmers

Similar items