Hubbell Incorporated PLED96W-030-C3150-D 96 W ballast
Constant-current 96 W LED driver delivering 3150 mA at 10-30 Vdc with 0-10 V dimming, IP66 enclosure and UL Type HL hazardous-location rating
- UL Type HL rating suits hazardous locations
- 3150 mA constant current output drives LEDs precisely
- 0-10 V dimming enables smooth light control
- IP66 and NEMA 6 sealing resists water and dust
- Aluminium housing with thermal advantage manages heat up to 90 °C
96 W Constant-Current LED Driver
The Hubbell PLED96W-030-C3150-D supplies a fixed 3150 mA output across a 10-30 Vdc range for LED arrays that require precise current regulation. It accepts a universal 100-277 Vac nominal input, making it suitable for commercial and industrial lighting installations worldwide.
0-10 V Dimming and Thermal Housing
An integrated 0-10 V resistance dimming interface allows compatible controls to adjust light levels without external modules. The Magic Thermal Advantage aluminium housing manages heat so the driver operates up to a 90 °C maximum case temperature and starts reliably at -30 °C.
UL Type HL Hazardous-Location Rating
The driver carries UL Type HL approval and meets IP66 and NEMA 6 ingress protection, permitting installation in classified hazardous areas where flammable gases or dust may be present. Buyers who need a non-hazardous-rated or non-dimmable unit should select a different model.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $32.99
- Cheaper than about 63% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | Hubbell |
Questions about this item
Will the aluminium housing need any maintenance to keep its thermal advantage over time?
The sealed IP66 aluminium housing has no user-serviceable parts and is designed to dissipate heat without routine maintenance.
What limits continuous full-load operation before the driver shuts down?
The case temperature limit is 90 °C; sustained loads that push the housing above this point will trigger thermal protection.
How much heat and power draw should I expect when the driver runs at 96 W all day?
At full load it draws 96 W from the mains and delivers up to 94.8 W to the LEDs, with the difference appearing as heat inside the IP66 housing.
More in Lamp Ballasts & Drivers
Similar items
LITHONIA LIGHTING HGX LED 2RH ALO 40K 120 PE DDB M2 ballast
- Ballasts
Philips Advance IOP-3P32-HL-N Electronic Ballast 107-110W 3 Lamps
- Ballasts
Philips Advance ICN-3TTP40-SC CFL Ballast Instant Start 3 Lamp 40W 120-277V
- Ballasts





