Hubbell Incorporated Straight Blade Plug 20A 125V Gray
A 20 A 125 V straight-blade duplex receptacle for commercial flush-mount wiring in gray nylon
- Product colorGray
- Main materialHAWA
- 20 A rating supports high-draw equipment
- 125 V AC compatible with standard commercial circuits
- Gray nylon housing resists impact and chemicals
- Side-wire terminals simplify flush-mount installation
- Straight-blade 5-20R duplex fits standard outlets
Hubbell 20 A 125 V Straight Blade Plug
The Hubbell straight blade plug is a commercial-grade receptacle rated for 20 A at 125 V AC. It features a standard duplex outlet with two poles and three wires for flush mounting. The gray nylon body uses side-wiring terminals for secure conductor connection. This component suits fixed wiring in commercial environments.
Suits 20 A commercial branch circuits
Electricians wiring 20 A branch circuits in offices, retail or light-industrial spaces will find the correct rating and mounting style. Installations that require tamper-resistant shutters, weather-resistant construction, surge suppression or a power indicator should select a different device. The plug is not corrosion resistant and lacks HP-rated motor switching beyond 1 hp.
20 A 125 V rating decides fit
The single specification that determines compatibility is the 20 A 125 V rating combined with the 5-20R configuration. Match this exactly to the circuit breaker and conductor size specified in the electrical design. Using the device on a circuit with a different voltage or amperage rating creates a safety hazard and violates electrical codes.
How it compares
Measured against everything we stock in AC Plugs & USB Wall Chargers, at today’s prices. Recalculated every night.
- Price $1.99
- Cheaper than about 99% of the 547 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Hubbell Wiring Device-Kellems |
| Product color | Gray |
| Size & build | |
| Main material | HAWA |
Questions about this item
Will the 20 A 125 V rating match the circuit breaker in my older workshop panel?
The device is rated for 20 A at 125 V AC, so it aligns with a standard 20 A single-pole breaker and 12 AWG wiring commonly found in older workshops.
How can I verify the duplex receptacle is wired correctly after installation?
Use a receptacle tester or multimeter to confirm 125 V between hot and neutral on each outlet, proper ground continuity, and correct polarity across both 5-20R slots.
Does the package include mounting screws and wire connectors, or must I supply them?
The receptacle itself is supplied; mounting screws and wire connectors are not included and must be purchased separately.
More in AC Plugs & USB Wall Chargers
Similar items
JacobsParts Inc. LSLC-A-5PK 90-Degree Right Angle Straight Blade Plug 3528
- LED Light Strip Con…
Zojirushi CD-KD12-J straight blade plug
- UL Listed/CSA Certi…
- Adhesives; Enamels;…
JacobsParts Inc. DCCONN-C Straight Blade Plug 5.5mm x 2.1mm 30cm 2-Pack
- 40 cm
- Female to Female
JacobsParts Inc. LSLC-B-5PK 5-pack 8mm T-shaped solderless straight blade plug for 3528 LED strip
- LED Light Strip Con…





