Hubbell Incorporated TAYMAC MM420C 1-Gang Weatherproof Cover Polycarbonate
A weatherproof cover for one-gang GFCI receptacles, mountable horizontally or vertically with a 16-in-1 configuration
- Product typeElectrical Boxes & Covers
- Weatherproof in-use cover protects receptacles in wet locations
- 16-in-1 configuration fits GFCI and standard devices
- Horizontal or vertical mounting suits any installation
- Polycarbonate body with polyethylene foam gasket resists impact and seals out moisture
- cULus listed and NEC compliant for code-approved safety
1-Gang Weatherproof Cover
The Hubbell TAYMAC MM420C is a polycarbonate cover rated for horizontal or vertical mounting. It fits a single gang box and carries a cULus listing for NEC compliance. The clear, non-metallic body includes an attached polyethylene foam gasket and mounting hardware for a ready-to-install seal. ||
Indoor-Only Installations
This cover suits outdoor or damp locations where a GFCI receptacle needs protection while in use. Builders running indoor-only circuits or using metallic boxes without a non-metallic requirement will not need this weatherproof rating. The 16-in-1 configuration handles multiple device layouts but offers no benefit for fixed single-device covers. ||
16-in-1 Configuration
The cover’s 16-in-1 design accepts a wide range of plug and device combinations under one lid. This single specification determines whether the cover matches the variety of cords and receptacles on site. If the job requires only one fixed cord set, a simpler cover may be sufficient.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 88% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | TAYMAC |
| Product type | Electrical Boxes & Covers |
Questions about this item
Does the TAYMAC MM420C include the mounting hardware I need to attach it to an existing box?
The cover ships with mounting hardware included, so you can fasten it directly to a standard 1-gang box without buying extra screws.
Will this polycarbonate cover fit over the GFCI receptacle I already have installed?
Yes, the 16-in-1 configuration is designed to accommodate a GFCI receptacle in either horizontal or vertical orientation.
How can I confirm the cover is sealed correctly once it is mounted?
The attached polyethylene foam gasket compresses against the box face; a uniform seal around the perimeter shows it is working as intended.
More in Electrical Enclosures & Cabinets
Similar items
Wiremold 16172 Deep Device Box, Series 500/700, Steel, 2 Channels
- Electrical Boxes &…
Bryant 9754NS electrical box 15 A 125V AC 2 pole screw terminal .281 to .625 in
- Traffic & Parking L…
- 0.281 in to 0.625 in
Hubbell Incorporated RACO 296-1 Electrical Box, 15.8 cu in, Ceiling Box Type, 1 Gang, Galvanized
- Electrical Boxes &…





