We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mounted occupancy sensor with passive infrared detection and integrated nightlight

Hubbell Incorporated

Hubbell Incorporated WS2000NW Occupancy Sensor PIR 1200 sq ft White

SKU CH-JC8N-VN3QE

Wall-switch motion sensor covers 1,200 sq ft with passive infrared detection and adjustable 20-second to 30-minute time delay

  • Covers large areas with 1200 sq ft PIR detection
  • Adjustable timing from 20 sec to 30 min suits any room
  • Works on 120V or 277V AC circuits for flexible wiring
  • Integrated nightlight adds low-level illumination after dark
  • White finish blends cleanly with standard wall switch plates

Sensor type and coverage

The Hubbell WS2000NW is a passive infrared occupancy sensor with an integrated nightlight, designed for indoor wall-switch-box mounting. It detects motion across 1200 square feet at the suggested mounting height, making it suitable for offices, conference rooms and similar spaces where automatic lighting control is required.

Sustained operation behaviour

The unit operates on hard-wired 120V AC or 277V AC supplies and holds lights on for a programmable delay between 20 seconds and 30 minutes after the last detected movement. This range lets installers match the timeout to typical occupancy patterns without the sensor cycling too frequently during continuous use.

Installation notes and common issues

Wiring is a standard hard-wired connection into a single-gang wall box, and the white finish matches common decorator devices. The most frequent issue is reduced coverage when the sensor is mounted higher than the suggested height or when partitions block the infrared field, so verify sight lines before finalising the location.

How it compares

Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.

Price $77.99
Pricier than about 62% of the 1,098 comparable items (median $61.99).

Specifications

Product
Brand nameHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

How much power does the WS2000NW draw when it is running continuously?

The sensor operates on 120V AC or 277V AC hard-wired supply; its own standby draw is minimal and not separately rated.

What existing wiring must be in place for the WS2000NW to function?

A standard wall-switch box with 120V AC or 277V AC circuit wiring is required for hard-wired installation.

Will the WS2000NW control older fluorescent ballasts or LED drivers without flicker?

Yes, the passive infrared sensor switches the connected 120V AC or 277V AC load — ballasts or drivers — with a 20 sec to 30 min adjustable time delay.

More in Contactors, Relays & Motor Starters

Similar items