Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 3.5-inch SATA hard drive spinning at 7200 RPM with simple-swap installation for IBM servers and workstations
This 1 TB 3.5-inch hard drive runs at 7 200 RPM on a SATA 3.0 Gb/s interface and is built for simple-swap bays in IBM eServer xSeries servers and IntelliStation workstations. It delivers 9 ms average seek time and 4.17 ms average latency for mid-range to advanced storage workloads. The bare-drive packaging suits system integrators and IT teams expanding existing arrays.
The jump is worthwhile when moving from a lower-capacity or lower-RPM SATA drive that can no longer hold the working data set or meet throughput demands. The 7 200 RPM spindle and 3.0 Gb/s link raise sustained transfer rates without changing the host controller. Buyers who need higher areal density or a different interface should look elsewhere.
The drive slides into any 3.5-inch simple-swap tray that accepts a standard SATA data and power connector, freeing a hot-swap slot for other devices. No extra cabling or adapter is required beyond the backplane already present in compatible IBM chassis. Systems without a simple-swap backplane cannot use the tray mechanism.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | IBM |
| Model name | 43W7622 |
| Total capacity | 1 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 9 ms |
| Mean latency | 4.17 ms |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 1.36 kg |
| Package size | 145 × 102 × 25 mm |
The drive is a 3.5" form factor with a simple-swap tray. It mounts in IBM eServer xSeries or IntelliStation bays that accept simple-swap trays.
Slide the tray into the bay until the connector seats firmly; the step often missed is not pushing far enough to engage the SATA backplane.
Replace the drive if SMART reports reallocated sectors, seek errors rise above normal, or average latency exceeds the 4.17ms specification.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?