Ridgid 632-86927 18 in Adjustable Wrench hand tool
- Alignment Tools
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 ft blued steel fish tape with laser-etched 12 in markings and a non-oily, rust-resistant finish
The Ideal 31-010 is a blued steel fish tape designed for pulling wires through conduit and raceways. Its 1/8 inch width and 50 foot length suit long runs where added stiffness helps push through bends. Laser-etched markings at 12 inch increments let you measure the run as you feed the tape. The non-oily finish resists rust and oil stains for indoor or outdoor jobs.
The tape ships in a 7 inch diameter thumb winder case that keeps the coil contained during storage and deployment. Because the steel is stiffer than non-metallic alternatives, it tracks straighter in long straight sections but requires more force to navigate tight bends. Kinking the tape near the end can make it difficult to rewind smoothly, so feed steadily and avoid sharp angles.
Verify that the conduit inside diameter can accommodate a 1/8 inch wide tape with a .045 inch height, especially where multiple cables already occupy the raceway. Confirm the total pull distance does not exceed 50 ft, as the tape cannot be joined to another length. Check local regulations for the California Proposition 65 warnings on the product label before use.
Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | IDEAL |
| Model name | 31-010 |
| Product type | Fishing Tapes, Sticks & Lines |
Extend the tape fully and confirm the laser-etched 12 in markings are visible and sequential; the non-oily finish should slide smoothly through conduit without binding or leaving residue.
The package includes the 50 ft blued steel tape with laser-etched 12 in increments housed in a 7 in diameter thumb winder case; no additional accessories are included, so wire-pulling lubricant or connectors are separate purchases.
The 1/8 in wide x 0.045 in high blued steel tape is the single listed version; its stiffness suits long runs, and the 50 ft length with 12 in laser-etched markings covers typical residential and commercial pulls.
More in Utility & Specialty Hand Tools
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?