IHDAPP 120 mm RGB case fan 4-pack with IR remote

Four-fan RGB kit with IR remote

The IHDAPP 120 mm RGB case fan 4-pack includes four 120 mm fans, a dedicated controller and an infrared remote. Builders who want synchronised lighting across multiple intake or exhaust positions can manage every fan from one handheld unit. The kit suits standard ATX chassis that accept 120 mm mounting points.

12 V and 5 V power with mini 6-pin and 4-pin

Each fan draws 4.2 W at 0.23 A peak current and runs on a combined 12 V and 5 V supply. Speed ranges from 0 to 1200 RPM with a tolerance of plus or minus ten percent, delivering up to 37.8 cfm of airflow at 25 dBA. The dual connector types limit direct motherboard header control; the supplied controller is required for PWM or voltage regulation.

Hydraulic bearing rated for 30 000 hours

Hydraulic bearing construction targets a 30 000-hour continuous lifespan under normal operating conditions. The ABS frame measures 120 mm by 120 mm by 25 mm and uses standard four-corner screw holes. The external controller and remote add cabling that must be routed behind the motherboard tray, so builders with tight rear clearance should plan cable paths before installation.