We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small gold-coloured coaxial splitters each with one input and four threaded outputs

iMBAPrice

iMBAPrice 110015-2 2.4 GHz 4-Way Coaxial Splitter 2-Pack

SKU CH-AMD9-HDD09

Splits one coaxial input into four outputs for multiple displays up to 2400 MHz

  • Splits one coaxial input into four outputs
  • Gold-plated connectors resist corrosion for reliable signal transfer
  • Supports frequencies up to 2400 MHz for satellite and cable
  • Passive design needs no external power supply
  • Two splitters included for multiple installation points

Two-Pack Coaxial Splitter

This iMBAPrice 110015-2 two-pack provides two 4-way coaxial splitters for distributing a single signal source to multiple displays. Each unit accepts one input and delivers four outputs, suited for video, satellite or VCR connections. The gold-plated F-type screw terminals ensure a secure, corrosion-resistant link. Installation is straightforward for home or small commercial setups.

Upgrade From Basic Splitters

Replacing a 2-way or 3-way splitter with these 4-way units adds extra outputs without running new cables from the source. The 5–2400 MHz bandwidth supports standard cable and satellite frequencies, so the jump is worth it when you need to feed four televisions or devices from one line. Passive operation means no power supply is required, keeping the installation simple.

Check Your Signal Budget

Before ordering, verify that your incoming signal level can tolerate the insertion loss of a 4-way passive split across all connected devices. Confirm that every display or tuner uses an F-type coaxial input compatible with the screw-on connectors. Ensure the coaxial cables you plan to use are rated for the 2400 MHz upper frequency to avoid unexpected attenuation.

How it compares

Measured against everything we stock in Cable Locks & Laptop Extras, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 75% of the 8,808 comparable items (median $16.99).

Specifications

Product
Brand nameiMBAPrice

Questions about this item

What type of coaxial connectors does the 110015-2 splitter use for its four outputs?

The splitter uses F-type screw-on connectors for the single input and each of the four outputs, so standard coaxial cables thread directly onto the unit.

Which step do installers most often skip when connecting the 110015-2 to a satellite or cable line?

Many forget to hand-tighten every F-connector firmly; a loose thread lets ingress noise into the 5–2400 MHz path and degrades the split signal.

When should the 110015-2 splitter be replaced in a long-term distribution setup?

Replace the unit if corrosion appears on the gold-plated contacts or if signal levels drop noticeably across all four ports, indicating internal degradation.

More in Cable Locks & Laptop Extras

Similar items