We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ingersoll-Rand 117 air hammer pistol grip metal barrel .401 shank

Ingersoll/Rand

Ingersoll/Rand 117 Air Hammer 3-1/2 In Stroke .401 Shank 2000 BPM

SKU CH-PMB6-27MBA MPN 117

Air hammer with 3-1/2 inch stroke, .401 shank and 2000 BPM for chipping, cutting and rivet removal

  • Longer stroke piston delivers 3-1/2 in. reach for deep work
  • 2000 blows per minute provides rapid material removal
  • Built-in regulator gives full control at 90 psi
  • Alloyed steel barrel and heat-treated piston extend tool life
  • Spring-type retainer secures .401 in. shank chisels during operation

General-duty air hammer for light tasks

The Ingersoll/Rand 117 is a pistol-grip air hammer built for chipping, sheet-metal cutting, exhaust work, scraping and rivet or joint separation. It runs at 2000 blows per minute with a 3-1/2 in stroke and a .401 shank for standard chisels. A built-in regulator gives full control and the alloyed steel barrel with heat-treated piston extends service life.

Users needing moderate air consumption

Suits technicians who have a compressor delivering 3 CFM average and 14 CFM at full load through a 3/8 in hose at 90 psi. The 1/4 in air inlet and spring retainer keep setup simple for general maintenance or light construction. Not for shops that need higher blow rates, longer strokes or heavy-duty demolition capacity.

.401 shank compatibility decides fit

This tool accepts only .401 in shank chisels held by a coil-spring retainer. If your existing chisels use a different shank size or retainer style, they will not fit and the hammer cannot be used for the intended work.

How it compares

Measured against everything we stock in Hammers, Mallets & Sledges, at today’s prices. Recalculated every night.

Price $82.99
Pricier than about 79% of the 78 comparable items (median $26.99).

Specifications

Product
Brand nameIngersoll-Rand
Model name117

Questions about this item

How often will the spring-type chisel retainer need replacement?

The coil spring retainer is a wear part; inspect it each time you change chisels and replace it if the spring no longer seats the .401 shank firmly.

Which air-supply limit appears first during continuous operation?

At full load the tool draws 14 CFM, so the compressor's ability to sustain that flow at 90 psi is the first bottleneck.

How loud and hot does the hammer get when run all day?

The alloyed steel barrel and heat-treated piston are designed for longer life, and the built-in regulator lets you throttle air volume to manage heat and noise during extended use.

More in Hammers, Mallets & Sledges

Similar items