We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver air impact wrench with black rubber grip and 1/2 inch square drive

Ingersoll/Rand

Ingersoll/Rand 232TGSL 1/2" Air Impact Wrench 625 ft-lb

SKU CH-P90D-A7BYQ MPN 232TGSL

A 1/2" air impact wrench delivers 625 ft-lb breakaway torque at 10,000 RPM free speed

  • Product typeBent Nose Pliers
  • Delivers 625 ft-lb breakaway torque for stubborn fasteners
  • 500 ft-lb fastening torque handles heavy-duty bolting
  • 10,000 RPM free speed drives rapid rundown
  • 1,250 impacts per minute maximise hammer force
  • 1 ft-lb per lb power-to-weight ratio keeps handling light

Purpose and User

The Ingersoll/Rand 232TGSL is a 1/2-inch air impact wrench built for general-duty fastening and removal work. It suits technicians who need a pneumatic tool capable of 625 ft-lb breakaway torque and 500 ft-lb fastening torque for bolts up to 1/2 inch.

Air Supply Requirements

The tool consumes 23 cfm at 90 psi through a 1/4-inch NPT inlet and requires a minimum 3/8-inch hose. It operates between 90 and 100 psi maximum pressure, so the compressor and line must sustain that flow without excessive drop.

Capacity and Limits

Free speed reaches 10,000 RPM with 1,250 impacts per minute, delivering a power-to-weight ratio of 104.1 ft-lb/lb. The exhaust exits at the bottom and sound level measures 105 dB. Buyers needing higher torque, lower noise or cordless operation should consider other tool classes.

How it compares

Measured against everything we stock in Pliers, Wrenches & Gripping Tools, at today’s prices. Recalculated every night.

Price $339.99
Pricier than about 91% of the 2,110 comparable items (median $23.99).

Specifications

Product
Brand nameIngersoll-Rand
Model name232TGSL
Product typeBent Nose Pliers

Questions about this item

How often will the 1/4 in NPT air inlet or 3/8 in hose need new seals?

Check the inlet O-ring and hose fittings whenever air leaks appear; with clean, dry air at 90 psi they typically last months before needing replacement.

What limits continuous running at 10,000 RPM and 1,250 impacts per minute?

The 23 cfm air demand at 90 psi is the first bottleneck — if the compressor cannot keep up, torque drops and the tool slows.

How loud and hot does it get during all-day use at 105 dB?

Expect 105 dB impact sound and noticeable heat at the motor housing; run in a ventilated area and wear hearing protection for extended sessions.

More in Pliers, Wrenches & Gripping Tools

Similar items