We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six bi-metal reciprocating saw blades, 24 TPI, .035 in thick

Ingersoll/Rand

Ingersoll/Rand IRTP4CS6 24 TPI Reciprocating Saw Blades 6 Pack

SKU CH-TDW6-B8RB5

Six-pack of 24 TPI bi-metal reciprocating saw blades for cutting thin metal, wood, plastic and nail-embedded wood

  • Main materialHAWA
  • Cuts thin metal cleanly with 24 TPI bi-metal teeth
  • Handles aluminum and soft metals without binding
  • Slices nail-embedded wood and plastic in one pass
  • Rigid straight-edge design keeps cuts true
  • Six blades per pack keeps the job moving

Air Reciprocating Saw Blades 24 TPI

These Ingersoll/Rand bi-metal blades fit standard reciprocating saws and are designed for cutting thin metal, aluminium, nail-embedded wood, plastic, soft metals and wood. The six-pack supplies enough blades for extended workshop or site work without frequent reordering.

Thermal noise and power draw in normal use

Air-driven tools produce minimal vibration and no electrical heat, so the blades run cool and quiet during prolonged cuts. The 0.035 in thickness reduces drag, lowering the air consumption needed from the compressor.

24 teeth per inch for thin metal

The fine 24 TPI pitch gives clean, controlled cuts in sheet metal and similar thin materials. Coarser blades will tear thin stock, while finer pitches are unnecessary for the listed materials.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 80% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameINGERSOLL-RAND
Product typeOther
Size & build
Main materialHAWA

Questions about this item

How do I install these 24 TPI bi-metal blades into my reciprocating saw, and what step is often missed?

Insert the straight-back shank fully into the saw's clamp until it seats, then tighten the blade clamp securely; the step often missed is verifying the blade is locked straight before starting the cut.

When will these 0.035 in thick blades need replacement during metal cutting?

Replace the blades when the 24 TPI teeth become dull or rounded, which shows as slower cutting in thin metal and increased vibration during use.

What is the first limit I will hit when using these blades continuously on aluminum or soft metals?

The 0.035 in blade thickness limits heat dissipation, so the blades will overheat and lose edge hardness before the teeth wear out during sustained cutting.

More in Bits, Hole Saws & Accessory Kits

Similar items