We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black aluminium tubes with threaded ends and two silver adapters

InnoGear ET04 Mic Stand Extension Tube 2 Pcs 5/8" Thread 2.99" Black

SKU CH-MQE0-4ZZN6

Two aluminium tubes and two adapters add 2.99 inches of reach to most boom arms and stands using standard 5/8" threads

  • Spec summaryMic Stand Extension Tube, Clamp, 3 in
  • Measurements2.3876 cm × 7.0104 cm × 8.6106 cm
  • Surface finishBlack
  • Overall length3 in (7.62 cm)
  • HighlightsMic Stand Extension Tube
  • Product weight0.082 kg
  • Adds 2.99 inches of reach for closer microphone placement
  • 5/8" male-to-female threads fit most boom arms and stands
  • Includes two 3/8" to 5/8" adapters for wider device compatibility
  • Aluminium alloy construction resists rust and deformation
  • Lightweight 0.082 kg tubes install without limiting angle adjustment

Extension Tube Kit

This InnoGear ET04 kit provides two 2.99 inch extension tubes with 5/8 inch male and female threads. Two 3/8 inch female to 5/8 inch male adapters are included for broad mounting compatibility. The set extends boom arms or stand height to position microphones closer to the source. It suits podcasters, streamers and home-studio owners needing extra reach.

Aluminium Build Quality

Each tube and adapter is machined from aluminium alloy with precise threads for a secure hold. The black finish resists rust and deformation over time. At 0.082 kilograms the hardware adds minimal mass to the stand. The low-profile design does not restrict angle adjustment of the attached microphone.

Sustained Positioning

Under continuous use the threads maintain grip without loosening or slipping. The solid alloy construction prevents sag even when heavier broadcast microphones are mounted. Adapters allow quick conversion between 3/8 inch and 5/8 inch standards without tools. The kit delivers a permanent extension solution rather than a temporary workaround.

How it compares

Measured against everything we stock in Audio Stands, Racks & Boom Arms, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 80% of the 791 comparable items (median $32.99).

Specifications

Product
Brand nameInnoGear
Model nameET04
Part numberET04
Size & build
Surface finishBlack
Overall length3 in (7.62 cm)
Measurements2.3876 cm × 7.0104 cm × 8.6106 cm
Product weight0.082 kg

Questions about this item

How do I install the 5/8" male thread onto my boom arm without cross-threading the aluminum alloy tube?

Start the 5/8" male end by hand, turning slowly until the threads engage fully; the precision-cut threads on the aluminum alloy tube will then seat tightly without tools.

Will the 3/8" female to 5/8" male adapters need replacement if the slot design strips from repeated tool use?

The adapters are machined from the same aluminum alloy as the tubes, so the slotted base resists stripping under normal adjustment cycles.

At what point does the 2.99 inch length limit microphone positioning on a desktop stand?

The 2.99 inch extension adds fixed reach; if the shock mount or cable routing needs more clearance, the tube itself cannot be lengthened further.

More in Audio Stands, Racks & Boom Arms

Similar items