PYLE AUDIO PP444 Phono Turntable Pre Amplifier 12 V DC car electronics accessory
- Installation Tools
- Converts Phono Sign…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 49 ft hardwire kit powers an INSEETECH 3-channel mirror dash cam from a 12-24 V vehicle supply with 5 V 3 A output and low-voltage protection
This hardwire kit is built specifically for the INSEETECH 3-channel mirror dash cam and provides a 49FT cable to reach from the front unit to a rear camera on larger vehicles. It converts a 12-24V vehicle supply to the 5V 3A output the dash cam requires and includes low-voltage protection to prevent battery drain during 24-hour parking mode. The kit suits cars, trucks, trailers, vans and RVs.
Three labelled wires connect to constant battery, ignition-switched ACC and a chassis ground point, while a dedicated red wire on the rear-camera lead activates an on-screen reversing guide when tied to the reversing-light positive. If the reversing assistant is not wanted the red wire can be left disconnected without affecting power delivery. Installation follows the dash cam user manual and requires no specialised tools.
At 49FT the cable comfortably spans the full length of most cars, vans and RVs, allowing the rear camera to be mounted at the back of a long wheelbase or trailer. Runs significantly longer than 49FT are not supported by this kit, so builders needing extra reach for articulated lorries or extended conversions will need a different solution.
Measured against everything we stock in Car Audio Accessories & Wiring, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | INSEETECH |
| Model name | INS102-Cable |
| Product type | Dash Installation Kits |
| Product color | Black |
| Ports & slots | |
| Cable type | Dash Cam Hardwire Kit |
| Size & build | |
| Overall height | 0.78 in (1.98 cm) |
| Overall width | 9.05 in (23 cm) |
| Overall length | 7.48 in (19 cm) |
| Product weight | 4.76 oz |
| Main material | Polypropylene (PP) |
| Size or dimensions | 7.48 × 9.05 × 0.78 in |
| Compatibility | |
| Compatible with | Only for INSEETECH 3-Channel Mirror Dash Cam |
Yes, the hardwire kit comes in a single 49 ft length designed for the 3-channel mirror dash cam.
It converts the 12-24 V vehicle supply to a steady 5 V at up to 3 A, powering the dash cam and enabling 24-hour parking monitoring without draining the battery.
The kit uses a 4-pin Mini USB connector that carries the converted 5 V 3 A output; it cannot supply higher voltages or currents.
More in Car Audio Accessories & Wiring
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?