We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Intellinet Network Solutions

Intellinet Network Solutions 507479 SFP+ Transceiver Module

SKU CH-Q3DV-X2QTY MPN 507479

Connects switches over single-mode fibre at 10 Gbps up to 10 km using an LC duplex port

  • Supported standardsIEEE 802.3z (Fiber Optic Gigabit Ethernet) IEEE 802.3ae (Fib
  • Optical wavelength1310 nm
  • Fiber mode10GBase-LR multi-mode fiber
  • Maximum range10 km (6.2 mi.) with 9/125 µm cable
  • Transfer speed10 Gbit/s
  • Power adapterPower requirement: 3.3 V Power consumption: 1.0 W (maximum)
  • 10 Gbps data transfer for high-speed network links
  • Reaches 10 km over single-mode fibre at 1310 nm
  • MSA and Cisco SFP+ compliant for broad switch compatibility
  • Low 1.0 W maximum power draw at 3.3 V
  • Compact SFP+ form factor fits dense port configurations

10 km 10GBase-LR transceiver

The Intellinet 507479 is a 10 Gbps SFP+ optical module built for single-mode fiber links up to 10 km. It suits network engineers extending campus or metro connections between switches or routers. The LC duplex interface fits any MSA-compliant SFP+ port on Intellinet or third-party equipment.

Sustained 10 Gbps over long fiber

Operating at 1310 nm wavelength, the module maintains line-rate throughput across the full 10 km reach without the signal decay seen in shorter-range optics. Maximum power draw stays at 1.0 W from a 3.3 V supply, so thermal output remains predictable inside densely populated chassis. The rated operating window of 0 to 70 °C covers standard data-centre and wiring-closet conditions.

Metal housing with LC duplex port

A compact metal enclosure measuring 0.50 x 2.24 x 0.55 inches and weighing 0.04 lb shields against electromagnetic interference while allowing high-density patch-panel deployments. The standard SFP+ form factor and LC duplex connector enable hot-swap installation without tools. Storage tolerance from -40 to 85 °C and 10–85 % non-condensing humidity ensure shelf-life resilience.

How it compares

Measured against everything we stock in USB Hubs & Port Expanders, at today’s prices. Recalculated every night.

Price $64.99
Pricier than about 81% of the 68 comparable items (median $18.99).

Specifications

Product
Brand nameIntellinet Network Solutions
Model name507479
Performance
Transfer speed10 Gbit/s
Connectivity
Supported standardsIEEE 802.3z (Fiber Optic Gigabit Ethernet)
IEEE 802.3ae (Fiber Optic 10 Gigabit Ethernet)
Optical wavelength1310 nm
Fiber mode10GBase-LR multi-mode fiber
Maximum range10 km (6.2 mi.) with 9/125 µm cable
Power
Power adapterPower requirement: 3.3 V
Power consumption: 1.0 W (maximum)
Size & build
Product dimensions0.5 in × 2.24 in × 0.55
Product weight0.04 lb (0.02 kg)
Shipping weight0.20 kg
Package size57 × 14 × 12 mm
In the box
In the box10 Gigabit Fiber SFP+ Optical Transceiver Module
Environment & compliance
Temperature rangeOperating temperature: 0 – 70 degree C (32 – 158 degree F)
Storage temperature: -40 – 85 degree C (-40 – 185 degree F)
Humidity range10 – 85% RH, non-condensing

Questions about this item

How much power does the 507479 module draw and what heat should I expect when it runs 24/7?

Maximum draw is 1.0 W at 3.3 V, and it is rated for continuous operation between 0 °C and 70 °C.

What must my switch provide for this transceiver to operate?

An SFP+ slot that follows the MSA specification or a Cisco-compatible SFP+ port, plus a single-mode LC duplex patch cord.

Will the 1310 nm wavelength work with the older 1 GbE SFP ports I still use?

No, the module is built for 10 GbE (IEEE 802.3ae) and requires an SFP+ port; it will not link at 1 GbE on legacy SFP slots.

More in USB Hubs & Port Expanders

Similar items