We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ion LD36 floor microphone stand with utility tray, square 5.2lb base, black steel finish

Ion LD36 Microphone Stand with Tray 70" 5.2lb Base

SKU CH-ZAQX-KJ0RC

Floor microphone stand with utility tray, adjustable from 22 to 70 inches, 5.2 lb weighted square base, boom arm with 180° swivel clip, dual-thread adapter, cable management, breaks down in 20 seconds

  • Spec summaryMic stand floor with tray, square, 70 in
  • Measurements11.4046 cm × 29.8958 cm × 45.212 cm
  • Overall length70 in (178 cm)
  • HighlightsMic stand floor with tray
  • Product weight2.8 kg
  • Stable support for heavy mics with 1.5mm steel arm and 25mm rod
  • Height adjusts 22 to 70 inches with smooth clutch and 180° swivel clip
  • Compact 5.2lb square base with EVA pads saves space and protects floors
  • Dual-thread clips plus 3/8 to 5/8 adapter fit popular models like Blue Yeti and Shure SM7B
  • Breaks down into portable parts in under 20 seconds for mobile setups

Ion LD36 Microphone Stand Overview

The Ion LD36 is a floor-standing microphone stand with an integrated utility tray and boom arm designed for studio recording, podcasting and live streaming. Its 5.2 lb weighted square base and 25 mm reinforced steel rod provide stable support for heavy broadcast microphones. Height adjusts from 22 inches to 70 inches via a smooth clutch knob, accommodating users over six feet tall. The 180 degree swivel clip allows precise microphone positioning for any session.

Thermals Noise and Power Draw

As a passive mechanical stand the LD36 produces no heat, draws no electrical power and generates no fan or motor noise during operation. The 1.5 mm steel arm and EVA pads on the base absorb vibration and prevent resonance without active cooling. This silent, maintenance-free design suits noise-sensitive environments such as vocal booths and home studios where acoustic purity is essential.

Bundled Accessories and Software Impact

The package includes a dual-thread microphone clip, a 3/8 inch to 5/8 inch thread adapter and integrated cable management clips for a tidy setup. These items enable direct compatibility with popular models such as Blue Yeti, HyperX QuadCast, Audio-Technica AT2020 and Shure SM7B without extra purchases. The quick-detach mechanism breaks the stand down into portable parts in under 20 seconds for mobile recording. No software or drivers are required.

How it compares

Measured against everything we stock in Audio Stands, Racks & Boom Arms, at today’s prices. Recalculated every night.

Price $54.99
Pricier than about 78% of the 791 comparable items (median $32.99).

Specifications

Product
Brand nameIon
Model nameLD36
Part numberLD36
Size & build
Overall length70 in (178 cm)
Measurements11.4046 cm × 29.8958 cm × 45.212 cm
Product weight2.8 kg

Questions about this item

How do I attach the boom arm to the 25 mm reinforced rod without it slipping?

Slide the boom clamp onto the 25 mm rod and tighten the clutch knob until the 1.5 mm steel arm locks firmly; the knob must be fully seated or the arm will sag under a heavy mic.

Will the 3/8 to 5/8 adapter wear out and need replacing?

The threaded adapter is solid brass and rated for repeated changes; only the rubber EVA pads on the 5.2 lb base compress over time and should be swapped if they lose grip.

At what height does the 70 inch stand start to wobble with a Shure SM7B?

Stability holds up to the full 70 inch extension because the 5.2 lb square base keeps the centre of gravity low; wobble only appears if the boom is fully horizontal at maximum reach.

More in Audio Stands, Racks & Boom Arms

Similar items