We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black waterproof wire connector kit, IP68 rated, compact rectangular form factor

J&H LED

J&H LED JH-TWC9-82F Waterproof Wire Connector Light Kit IP68 300V 10A

SKU CH-FK6Y-4N9SN MPN JH-TWC9-82F

IP68 waterproof wire connectors rated 300 V and 10 A for indoor or outdoor lighting splices

  • Item nameWaterproof UL-Listed Wire Connector
  • SizeL3 in*W1 in*H1 in
  • Rated voltage300 - Volt
  • ComplianceUL
  • Certification listingUL
  • Warranty term6 Months
  • IP68 waterproof rating protects connections in wet environments
  • Rated for 300 V and 10 A to handle typical lighting circuits
  • UL listed for verified electrical safety compliance
  • Operates from –40 °C to 85 °C for year-round outdoor use
  • Flame-retardant polyamide housing resists cracking and fading

Waterproof wire connector kit

The J&H LED JH-TWC9-82F kit provides UL-listed waterproof wire connectors rated for 300 V and 10 A. They suit indoor or outdoor lighting projects where splices must resist moisture and dust. The polyamide housings are flame retardant and withstand prolonged sun exposure without cracking. DIY installers can use them to extend or repair power cables quickly.

IP68 sealing and thermal range

Each connector carries an IP68 rating, making it submersible and fully dust-proof for pool or landscape wiring. The operating temperature spans -40 °C to 85 °C, and the material passes a glow-wire test at 850 °C for fire safety. Normal use adds no audible noise and negligible power loss across the splice.

10 A current limit

The 10 A maximum current determines whether the connector matches the circuit load; circuits drawing more require a different device. The 300 V rating covers standard low-voltage lighting supplies. Buyers needing higher amperage or voltage must select another product.

How it compares

Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 92% of the 1,591 comparable items (median $33.99).

Specifications

Product
Brand nameJ&H LED
Model nameJH-TWC9-82F
Item nameWaterproof UL-Listed Wire Connector
Recommended useIndoor / Outdoor
Design styleContemporary
Power
Rated voltage300 - Volt
Size & build
SizeL3 in*W1 in*H1 in
Surface finishBlack
Environment & compliance
ComplianceUL
Certification listingUL

Questions about this item

How do I install the JH-TWC9-82F connector and what step is often missed?

Strip each wire to the correct length, insert fully into the ports, and tighten the gland nuts until the IP68 seal compresses evenly; the step most installers skip is verifying the gland is hand-tight plus a quarter turn so the 300 V 10 A rating holds underwater.

What maintenance or replacement will the JH-TWC9-82F need over time?

Inspect the black PA housing and gland seals annually for UV cracking or salt build-up; if the glow-wire 850 °C rated shell shows discolouration or the -40 °C to 85 °C range has been exceeded, replace the whole connector to keep the IP68 rating intact.

What limit appears first on the JH-TWC9-82F during sustained high-load use?

The 10 A current ceiling is reached before the 300 V voltage limit; continuous loading near 10 A in ambient temperatures above 85 °C will trigger the thermal limit of the polyamide body first.

More in LED Lighting Kits

Similar items