J-Tech Digital Inc. 5-Pack Remote Control Outlet Switch (JTD-Plug-2nd-5x2)
A five-outlet set with two IR remotes switches appliances up to 1200 W at 120 V from up to 50 m away
- Connection protocolInfared (IR)
- Product typePlug-in Module
- Control appliances remotely without rewiring or plug access
- Reduce standby power to cut bills and extend device life
- One remote manages up to five outlets simultaneously
- Strong RF signal works through walls up to 100 ft
- Learning function lets you pair or un-pair outlets freely
Five-outlet IR remote kit
This pack contains five plug-in modules and two handheld remotes that operate on infrared protocol. It is suited for households wanting to switch lamps, fans or small appliances without rewiring. The system works through walls and doors at distances up to 100 ft in line of sight. Users with limited mobility can control devices without reaching behind furniture.
1200 W 10 A per outlet rating
Each socket accepts AC 120 V 60 Hz input and supports a maximum load of 1200 W at 10 A. This capacity decides whether a heater, air-conditioner or high-draw tool can be connected safely. Exceeding the rating risks tripping the internal protection or damaging the module. Check the appliance label before plugging it in.
Low standby draw and RF operation
Standby consumption stays below 2 W per outlet, reducing wasted energy when devices are off. The 433.93 MHz radio signal penetrates doors and walls without interfering with other electronics. No audible fan or cooling noise is produced during normal switching. The remotes run on 12 V 23 A batteries included in the box.
How it compares
Measured against everything we stock in Plugs, Dimmers & Smart Lighting, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 70% of the 370 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Product type | Plug-in Module |
| Connectivity | |
| Connection protocol | Infared (IR) |
Questions about this item
How much power can the 1200 W rating actually handle when I plug in a heater or air-conditioner?
Each outlet is rated for 1200 W at 10 A on 120 V 60 Hz, so a typical space heater or window AC within that limit will run safely.
The remote uses 433.93 MHz RF — what does that frequency mean for range through walls?
The 433.93 MHz signal reaches about 50 m outdoors and 20 m indoors, penetrating doors and walls without interfering with other electronics.
What do I need on the wall side to mount these five outlets?
Each unit plugs directly into a standard North-American AC receptacle; no screws, brackets or extra wiring are required.
More in Plugs, Dimmers & Smart Lighting
Similar items
Blink BNC-60/U164R Wireless Remote Control Outlet 100 ft Range 15 A 125 V
- 1 Piece, One Remote…
- 1 Outlet, 1 Remote





