JacobsParts Inc. LTCH-K8-BLU 30mm Stainless Steel Momentary Push Button Disconnect with Blue LED

30mm IP67 Momentary Switch for Panels

This stainless-steel pushbutton fits a 30mm panel cutout and carries a 5 A, 250 V AC/DC rating. A blue LED runs independently at 12 V DC and 15 mA. The single-pole, single-throw action is normally open and momentary, making it suitable for starter, horn or PC power duties in automotive, marine and electronics projects.

Drill 30mm Hole, Secure with Nut and O-Ring

Cut the mounting hole with a 1-3/16 inch bit, thread the 18 mm neck through the panel and tighten the supplied metal nut from the rear. The rubber O-ring seats behind the 34 mm faceplate for extra water resistance. Wiring the LED separately from the switch contacts avoids the common error of powering the indicator from the load circuit.

IP67 Seal Holds Up to Continuous Exposure

The IP67 rating means the switch withstands prolonged immersion and heavy spray without ingress. Stainless-steel construction resists corrosion across the -20 °C to 55 °C operating range. Because the contacts are rated for the full 5 A continuously, the switch does not derate during long activations such as winch controls or sustained lighting circuits.